Performance Parts

Hose Clamp

• Rubber Covered Hose Loop
• Spring Steel Tab Mount

HP Main Body Retro Fit Kit

• Simple Installation With Common Hand Tools
• All Necessary Parts Are Included
• Eligible For Holley Contingency Programs

HVAC FILTER; 12 X 20 X 1, MERV 11

• Merv 11 rating
• Easy to clean and reuse
• Lifetime limited warranty

HVAC FILTER; 14 X 25 X 1, MERV 11

• Merv 11 rating
• Easy to clean and reuse
• Lifetime limited warranty

HVAC FILTER; 14 X 30 X 1, MERV 11

• Merv 11 rating
• Easy to clean and reuse
• Lifetime limited warranty

HVAC Filter; 14 x 30 x 1, MERV 8

• Merv 8 rating
• Easy to clean and reuse
• Lifetime limited warranty

HydraMat® Install Magnet Kit

• Magnet with integrated mounting stud
• Easy installation
• Kit includes 4 magnets, nuts and washers

ID Spring Locator Set of 16 - 1.510" OD, .630" ID, .060" Thickness

ID Spring Locators for 26120

Ignition Dual Wall Heat Shrink Tube Kit 106 pcs. Contains, Red and Black sleeves tube sizes from 1/8" up to 1/2" in 3" Lengths. Made of Polyolefin, Waterproof, Shrink Ratio 3:1, Rated up to 600V, and Temp. rated at -49° to 257°F

• 106 Piece Dual Wall Shrink Tube (waterproof)
• Tube Sizes from 1/8" to 1"
• Material: Polyolefin (Red and Black)

Ignition Weather Pack connector kit 209 pcs. Contains 1,2,3,4, and 6 pole Receptacles; Pins and Seals for 24-10 AWG wire; and a weather pack terminal release tool

• 209 Piece Kit
• Connector has locking mechanism that align terminal and seal
• Temperature rated at -40° C to 120° C (-40° to 248° F)

IN-LINE FUEL PULSE DAMPER

• Fittings included for damper/regulator’s and direct mount dampers
• Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
• Assembled and tested in the USA

Intake Valve for 60459, 60479, 60499 & 60559 Heads

The Edelbrock #9770 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valve for #60929 & #60189 Cylinder Heads

The Edelbrock #9640 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valve for #77919, #77929, #77939 & #77949 Heads

The Edelbrock #93774 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #60459, #60479, #60499 & #60559 Heads

The Edelbrock #9775 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Jet Assortment Billet Plate Only

• Genuine Holley Quality Parts

Jet Assortment Kit w/Billet Plate 70-80

Jet Assortment Kit with billet plate.

LED BULB; REPLACEMENT; T1-3/4 WEDGE; GREEN; FOR MONSTER TACH

• 2 Lumen Output
• .02 Amp Draw
• Bulb Life Expectancy 100000 Hours

LED BULB; REPLACEMENT; T3 WEDGE; BLUE

• 4.5-5 Lumen Output
• .06 Amp Draw
• Bulb Life Expectancy 100000 Hours

LED BULB; REPLACEMENT; T3 WEDGE; RED

• 6.5-8 Lumen Output
• .06 Amp Draw
• Bulb Life Expectancy 100000 Hours

LED INDICATOR LIGHT KIT (2 GREEN; 1 BLUE)

• Set Of Three 5/32 in. LED Indicator Lamps; 2 Green; 1 Blue
• Ideal For Turn Signal And High Beam Lights

LINE; BRAIDED STAINLESS STEEL; #3 DIA.; 6FT. LENGTH;-3AN AND 1/8in. NPTF FITTING

• 4 ft. Hose Length
• 12000 PSI Burst Pressure
• Incl. 3AN Female Straight

LINE; BRAIDED STAINLESS STEEL; #4 DIA.; 3FT. LENGTH;-4AN AND 1/8in. NPTF FITTING

• For Mechanical Pressure Gauge
• 3 ft. Hose Length
• Operating Temp -65 to 450 Deg. F

LINE; BRAIDED STAINLESS STEEL; #4 DIA.; 4FT. LENGTH;-4AN AND 1/8in. NPTF FITTING

• For Mechanical Pressure Gauge
• 4 ft. Hose Length
• Operating Temp -65 to 450 Deg. F

Line Clamp

• For Professional Engine Look