Performance Parts

GAUGE; TRANSMISSION TEMP; 2 1/16in.; 100-250deg.F; ELECTRIC; PHANTOM II

• 12 And 16V Compatible
• Incl. 1/8 in. NPT Temp Sender
• Incl. 3/8 And 1/2 in. NPT Adapters

GAUGE; TRANSMISSION TEMP; 2 1/16in.; 100-250deg.F; ELECTRIC; ULTRA-LITE II

• 12 And 16V Compatible
• Incl. 1/8 in. NPT Temp Sender
• Incl. 3/8 And 1/2 in. NPT Adapters

GAUGE; TRANS TEMP; 2 5/8in.; 140-280deg.F; LIQUID FILLED MECH; 8FT.; PRO-COMP

• Mechanical Instruments Provide Unmatched Accuracy
• Incl. 1/2 in. NPT Adapter
• Incl. Mounting Hardware/Instructions

GAUGE; WATER TEMP; 2 5/8in.; 140-280deg.F; MECHANICAL; ULTRA-LITE

• No Electrical System Required For Gauge Operation
• Incl. 1/2 in. NPT Adapter
• Incl. Mounting Hardware/Instructions

GAUGE; WATER TEMP; 2 5/8in.; 260deg.F; DIGITAL STEPPER MOTOR W/PK/WRN; ULTRA-LIT

• 12 And 16V Compatible
• Incl. Wiring Harness
• One-Touch Peak Recall

GAUGE WIRE HARNESS; UNIVERSAL; FOR TACH/SPEEDO/ELEC GAUGES; INCL LED INDICATORS

• Accommodates 5 or 6 Gauge Installations
• Incl. Main Wire Harness; Lighting Ground Harness
• Incl. 8 Crimp Connectors; 2 Green Turn Signal LEDS

Hardened Steel Set of 16 - 7 Degree, 3/8", Single Groove Street Locks

Includes 16 Pairs of hardened Steel Street Locks: 1 Groove, 7& deg

HD/Race Rigid 6 Pad

• "Excellence in Performance", backed by the best one-year warranty in the industry!

HD/Race Rigid 6 Pad Kit

• "Excellence in Performance", backed by the best one-year warranty in the industry!

Header Flange Chev RD BBC

Patriot Exhaust H7886 Header Flange Kit Chevrolet Big Block 2 1/8" Round Port 3/8"

Header Flange Chev Rd Port SBC

Patriot Exhaust H7864 Header Flange Pair Chevrolet Small Block 265-400 Tube Diameter 1 5/8" Round Port

Header Flange Chev Rect SBC

Patriot Exhaust H7894 SB Chevrolet 265-400 13/4" rectangle port Header Flanges

Heater Hose End Fitting - 90° with 1/2" NPT and 3/8" Barb

Edelbrock part #8169 heater hose end is designed to hold up to any plumbing task you have.

Heat Resistant Silicone Ducting, 2 in x 12 ft

• Used to channel cool air to many vital locations
• Mishimoto Lifetime Warranty
• N/A

Heat Shielding Sleeve, Silver 1inx36in

• Aluminum and fiberglass construction to protect critical lines and wires from engine heat
• Hook and loop fastener for simple installation
• Rated up to 1100F of continuous heat and 500F of direct heat

Heat Shrink Sleeve Wire Markers Black

• Color: Black
• Use on 7, 8, 9 and 10.4mm wire
• 2 sets of numbers, 1 through 8; enough for both ends of each wire

Heavy Duty Filter Cleaner, DryFlow 1 gal, 128 oz

• High performance cleaner and degreaser
• Dissolves the dirt build up and old filter oil
• Washes away with water

High Energy Polylock Set for 3/8" Rocker Stud

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

High-Flow Race Line Electric Fan, 10 in

• High-flow fan provides increased airflow
• Compact design with a housing diameter of 11-in and an overall thickness of 3.85-in provides sufficient clearance in the…
• Universal fitment

Hi-Tech 7.350" Long, .080" Wall, 5/16" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 8.125" Long, .080" Wall, 5/16" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 8.200" Long, .105" Wall, 5/16" Diameter Pushrod

With a 17 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech .105 Wall pushrods feature seamless chromemoly tubing that ensures even greater strength and durability.

Hi-Tech 8.380" Long, .080" Wall, 3/8" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 9.100" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 9.500" Long, .080" Wall, 3/8" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.