Performance Parts

135 Degree Deg Boot Black Sillicone

• Color: Black
• All boot/terminals fit 8-10.4mm
• Pack of 25

15 PSIa/1 Bar Stainless Sensor Kit

• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• Connector and pins included
• Analog Data Scaled in Charts

15" x 15" HydraMat®, Square

• Works with Alcohol, Ethanol, Methanol, and E-85 fuels
• Works with 2-cycle oil blends as high as 20:1
• Not for use with diesel fuels

15" x 3" HydraMat®, Rectangle

• Works with Alcohol, Ethanol, Methanol, and E-85 fuels
• Works with 2-cycle oil blends as high as 20:1
• Not for use with diesel fuels

180 Degree Boot/Terminal Kit Gray

• Color: Gray
• All boot/terminals fit 8-10.4mm
• Pack of 8

22 Channel CAN Sensor Module

• Four Dedicated 0-5V analog inputs
• Four Temperature (thermistor) inputs
• One Tach Input

2.5 Gallon Aluminum Air Tank; (4) 1/4 in. face ports; 6 in. D X 20 in. L, light weight, polished aluminum, 200PSI maximum operating pressure

• Dimensions 6 In D X 20 In L
• Polished Aluminum
• 200 PSI Maximum Operating Pressure

2.5 Gallon Aluminum Air Tank; (4) 1/4 in. face ports; 6 in. D X 20 in. L, light weight, raw aluminum, 200PSI maximum operating pressure

• Dimensions 6 In D X 20 In L
• Raw Aluminum
• 200 PSI Maximum Operating Pressure

2.5 X 2.5in. 180 degrees Performance Exhaust Y-Pipe

• Superior flow & performance
• CNC precision robotic manufacturing techniques
• Durable corrosion-resistant stainless steel construction

2.75" 6-Rib E-Force S/C Pulley in Black Finish for Stage 3 - Pro Tuner System

The Edelbrock pulley part #15823 allow you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference.

3.00" 6-Rib E-Force S/C Pulley in Black Finish for Stage 3 - Pro Tuner System

The Edelbrock pulley part #15822 allow you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference.

3/4" NPT Internal Plug

• Blue Anodized Aluminum

3.50" 6-Rib E-Force S/C Pulley in Black Finish for Stage 3 - Pro Tuner System

The Edelbrock pulley part #15820 allow you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference.

35 Lb/Hr Pico Fuel Injector (Qty 8)

The Edelbrock #3636 is a 35 pound-per-hour Fuel Injector for the ProFlo EFI Systems.

3/8" NPT Hex Head Plug

• Available for Any Plumbing Situation And Many Custom Applications

45-Degree Transition Coupler, Black, Silicone, 2.00in to 2.50in

• Allows for easy routing of complex coolant or intercooler pipes
• 100-percent silicone construction
• Constructed from four layers of silicone with embedded heat-resistant fibers

4 Gal Aluminum Air Tank; (4) 1/4 in. face ports & (2) 3/8 in. end ports; 6 in. D X 30 in. L, light weight, polished aluminum, 200PSI maximum operating pressure

• Dimensions 6 In D X 30 In L
• Polished Aluminum
• 200 PSI Maximum Operating Pressure

4 Gal Aluminum Air Tank; (4) 1/4 in. face ports & (2) 3/8 in. end ports; 6 in. D X 30 in. L, light weight, raw aluminum, 200PSI maximum operating pressure

• Dimensions 6 In D X 30 In L
• Raw Aluminum
• 200 PSI Maximum Operating Pressure

4in. Round Straight-Through Performance Exhaust Muffler

• 100% Stainless Steel
• Mufflers are Bi-Directional
• Delivers a Smooth, Deep Tone

4-PIN WIRE HARNESS/CAPACITOR FOR ALL FLAME-THROWER HEI DISTRIBUTORS AND GM 8-CYLINDER HEI DISTRIBUTORS

• Premium quality wire harness and capacitor.
• Insure good connection and "static free" operation.

5 BAR Brass MAP Sensor Kit

• Accurate with 3% margin for error.
• Weather resistant connector and pins included
• Analog Data Scaled in Charts

5 BAR Stainless Steel MAP Sensor Kit

• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• Connector and pins included
• Analog Data Scaled in Charts

5in. Round Polished Exhaust Tip

• Built to the highest standards in the industry
• Constructed using the latest manufacturing technologies
• Durable corrosion-resistant stainless steel construction

5 X 8in. Oval Straight-Through Performance Exhaust Muffler

• 100% Stainless Steel
• Mufflers are Bi-Directional
• Delivers a Smooth, Deep Tone

6 AN Male to 1/2"-20 Male - 5/16" Inverted Flare Fitting

• Available for Any Plumbing Situation And Many Custom Applications