Performance Parts

Secondary Wedged Float - No Main Jet Extensions

• Genuine Holley Quality Parts

SENSOR; FUEL PRESSURE; 0-100PSI; 1/8in. NPT MALE

• Built In Connector Mates To Delphi Packard Metri-Pack
• 150 Series Connector [12065287-Not Included]

SENSOR MODULE; GPS SPEEDOMETER INTERFACE; 16FT. CABLE; INCL. GPS ANTENNA

• Fully Sealed And Paintable Magnetic Micro Antenna
• Incl. 6.5 ft. Wiring Harness
• One-Touch Calibration

SENSOR; OIL PRESSURE; 0-80PSI; 1/8in. NPT MALE; FOR SHORT SWEEP ELEC.

• Replacement Sender

SENSOR; PRESSURE; SPEK-PRO; 100/120/150PSI; 1/8in. NPT MALE (EXCL. BOOST) PRE-20

• 1/8 in. NPT Thread
• Stainless Steel Construction
• 0-5V Sensor

SENSOR; PRESSURE; SPEK-PRO; 15/30PSI; 1/8in. NPT MALE (EXCL. BOOST)

• Solid State; Data Acquisition Quality Sensor
• 1/8 in. NPT Thread
• 0-5V Sensor

Set of 16 - 10 Degree, .310", Single Groove Locks w/o Lash Cap Recess

These Steel Super Locks without a lash cap recess feature a 10& deg

Set of 16 - 10 Degree, 3/8", Single Groove Locks w/ Lash Cap Recess

These Steel Super Locks with lash cap recess feature a 10& deg

Set of 16 - 10 Degree 3/8" Single Groove Locks w/o Lash Cap Recess +.050" Height

These Steel Super Locks with +.050 install height feature a 10& deg

Set of 16 Black Viton Valve Seals for .425" Guide Size, 5/16" Valve Stem

Valve Seals: Black Viton, .425 Guide, 5/16

Set of 16 Metal Viton Valve Seals for .530" Guide Size, 11/32" Valve Stem

COMP Cams offers a complete line of valve stem Seals, from the stock GM O-Ring to the positive-stop PTFE Seal.

Set of 8 - 10 Degree, 11/32", Single Groove Locks w/ Lash Cap Recess

These Steel Super Locks featuring a lash cap recess, 10& deg

Shifter Gate Plate - 3-speed Reverse Shift Pattern

• Quality B&M Replacement Part
• Solid Steel Construction
• Easy Installation

SHIFT LIGHT; AMBER LED; PEDESTAL; BLACK; QUICK-LITE

• Plugs Directly Into Autometer Tach w/Shift Light Connector
• Utilizes A Single LED
• Incl. Dimming Cover For Night Time Viewing

Shutoff Valve

• Shutoff Valve - Fuel

Side Hung Float

• Genuine Holley Quality Parts

Side Pivot Float - Billet Conersion Kit

Billet Metering Plate Kit - Designed for carburetors with side-pivot fuel bowls and no secondary metering block (most vacuum secondary carburetors).

SIGNAL SPLITTER/ADAPTER; OBD-II

• Device And Vehicle Compatibility May Vary
• Maintain OBD-II Data Signal Integrity

Single Valve Spring, 1.404 OD, 1.650 IH, .550 Lift, 300 LBS/IN

COMP Cams' new 26903 single valve springs are a product of innovative design and superior craftsmanship.

Smokers™ T Pipe Dual Exhaust Pipe Kit

• Built To Perform
• Minimize Back Pressure
• Fits All Full Size Pickup Beds

Spark Plug Wire Sync Kit

• For cylinder per cylinder management

SPE-3992 Breather Filter

• Triple chrome-plated steel top and base
• 10 mm flange inside diameter
• Fits 3/8 inch to 1/2 inch (8-12mm) tubes

SPE-60183 Spectre Pipe Plug Kit

• Chrome plated
• Four sizes to ensure good coverage
• Install using standard allen wrench

SPE-8703 T-Bolt Clamp

• Universal
• Stainless steel
• Designed for 3 inch system components

SPE-91489 Intake Tube/Duct Mounting Plate

• Universal modular air intake
• Made from high quality polished aluminum
• Mounts to flat surface