Performance Parts

GAUGE; SPEEDOMETER; 3 3/8in.; 160MPH; ELEC. PROGRAMMABLE; BLACK; PRO-CYCLE

• Vibration And Water Resistant
• Push Button Calibration Can Be Done While Driving
• Lit LCD Odometer

GAUGE; SPEEDOMETER; 5in.; 160MPH; ELEC. PROGRAMMABLE; ULTRA-LITE II

• Modern LED Through-The-Dial Lighting
• Simple Push Button 2 Mile Drive Calibration
• Incl. Mounting Hardware/Instructions

GAUGE; VOLTMETER; 2 1/16in.; 18V; ELECTRIC; C2

• Futuristic Red Point Look
• 1 Year Limited Warranty
• 12 And 16 Volt Compatible

Hardened Steel Set of 12 - 7 Degree, 3/8", Single Groove Street Locks

Includes 12 Pairs of hardened Steel Street Locks: 1 Groove, 7& deg

Header Flange Chev SAP BBC

Patriot Exhaust H7899 Header Flange Chevrolet Big Block 396-502 Tube Diameter 1 3/4"-2" Same As Port

Heat Shrink Terminal Kit

• Waterproof
• Shrink Ratio of 3:1
• 165 Piece Kit

High Quality Rocker Studs 7/16" (Qty 16)

The Edelbrock high-quality rocker studs #8593 7/16" (Set of sixteen) are used in Edelbrock cylinder heads requiring screw-in studs.

High Volume Fuel Rail Banjo Fitting Without Hole

• Sold each
• black anodized finish
• Fuel rails are sold separately

Hi-Tech 11.000" Long, .080" Wall, 3/8" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 7.200" Long, .105" Wall, 5/16" Diameter Pushrod

With a 17 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech .105 Wall pushrods feature seamless chromemoly tubing that ensures even greater strength and durability.

Hi-Tech One-Piece 8.050" Long, .135" Wall, 3/8" Diameter Pushrod

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Hi-Tech One-Piece 9.750" Long, .135" Wall, 3/8" Diameter Pushrod

Hi-Tech One-Piece 9.750" Long, .135" Wall, 3/8" Diameter Pushrod - Single

Hi-Tech Rocker Stud w/ 7/16" Base Thread and 1/2" Rocker Thread

Hi-Tech Rocker Stud with 7/16" Base Thread and 1/2" Rocker Thread

Hose Clamp

• Attach To Supporting Structure

Hose Clamp

• Attach To Supporting Structure

Hose; Hump 2.5"/3" X 3"

• Fits 2.5 to 3 inch diameter tubes
• 3 inches in length
• Constructed from long-lasting and durable EPDM rubber

Hose/Wire Wrap

• Easy Installation And Removal
• Lightweight
• Self-Wrapping

Hot Rod 2-1/8" Gear Select W/OD

Quality, Service and Value are not new to us.

Hot Rod 2-1/8" Oil Temperature Gauge

• Hot Rod Series
• 2 1/8" Oil Temperature
• Curved Glass Lens

HP Plus Disc Brake Pad

• HP Plus Compound
• Wide Temperature Range
• Fade Resistant

HPS 5.0 Disc Brake Pad

• Improved Pedal Feel
• Gentle On Rotors
• Extended Pad Life

HVAC FILTER; 14 X 24 X 1, MERV 11

• Merv 11 rating
• Easy to clean and reuse
• Lifetime limited warranty

ID Spring Locator - 1.300" OD, .770 I.D, .100" Thickness - Single

Intake Valve for #60579, #61579 & #61599 Cylinder Heads

The Edelbrock #9781 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Inverted Flare Plug

• Steel w/ Nickel Plated Finish
• 3/8"-24 Thread