Performance Parts

Speed-Seal Hose End

• Use with Earl's Speed Flex Smooth Bore PTFE Hose Only

Speed-Seal Hose End

• Unmatched Range-Configurations

SS4+ Brake System Rear

• CNC Machined from US Sourced Forged or Billet Aluminum
• Powder Coated Finish
• Dual Seals, Dust/Weather & Pressure

Stator - Unmolded - Harley Davidson - 15 Amp - 70-75 Big Twin

• Covered by our limited 90 Day warranty

Stat-O-Seal

• No Machining Of Grooves

Straight 7.950" Long, .165" Wall, 7/16" Diameter Pushrod Set

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Trailer Axle U-Bolt; 10;000-16;000-lb. Axles; 5in. Axle Tube

• 10 in. Length
• Thread End Of 5/8 in. - 11
• Suggested Nut PN[142833]

Tri Wing Tool

• Tri-Wing Drive Tool, Size 6
• Drop Forged and Tempered to Resist Wear
• Sold Individually

TUBING; NYLON; 1/8in.; 12FT. LENGTH; INCL. 1/8in. NPTF BRASS COMPRESSION FITTING

• 12 ft. Hose Length
• Burst Pressure 1000PSI
• Incl. Compression Ferrules

Ultra-Flex™ Hose End - 45 Degree - Size -16

• Reliable and Professional
• Lightweight Aircraft Aluminum
• Easy To Assemble

Ultra-Flex™ Hose End - Straight - Size -16

• Easy To Assemble

Universal Tube

• Two 6 inch straight sections with a 45 degree bend
• 4 inch outside diameter
• 0.065 inch thick 6063 aluminum alloy construction

V8 Red Steelie 5" Speedometer Gauge (140 MPH)

• V8 Red Steelie
• Stainless Low Step Bezel
• Curved Glass Lens

VALVE SPRINGS, 0.953" INNER, R

Single Inner Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

Valve Spring Shim Kit - 1.437" OD, .645" ID, .015", .030", .060" Thickness

This shim kit contains .015", .030" and .060" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Velocity Black 2-5/8" Transmission Temperature Gauge

• Temperature sending unit included
• Installation hardware included
• Full sweep provides increased accuracy

Velocity Black 3-3/8" Ultimate Speedometer Gauge

Velocity Black 3 3/8" Ultimate Speedometer (Speedometer/ Tachometer Combination) with Black Low Step Bezel and Flat Glass Lens.;Features a built-in ECM filter signal switch.

Velocity Black 4-5/8" Speedometer Gauge w/ Info Screen

• Velocity Black 4 5/8" Speedometer with information screen, 160 MPH, with a Black Low Step Bezel and a Flat Glass Lens.

Velocity White 2-1/8" Fuel Level Gauge

• Small 2 ⅛" hole size
• 0 ohms empty, 30 ohms full
• Flat glass lens

Velocity White 2-5/8" Outside Air Tempature Gauge

• Installation hardware included
• Easy to read 2 5/8" size
• Pushbutton calibration

40 Series Chambered Muffler

• No internal packing to blowout
• Aggressive Sound Exterior Exhaust Tone
• Durable fully welded 16 gauge aluminized steel

Accelerator Pump Nozzle Kit Includes: .024", .033", .043" Nozzles and Gaskets

The Edelbrock #1475 accelerator nozzle is designed for use with Edelbrock Performer Series as well as Thunder Series AVS carbs.

AEM DryFlow Air Filter

• Engineered to deliver enhanced horsepower & acceleration for a more exhilarating driving experience every time you hit…
• Features a performance-focused filter top that maximizes incoming airflow, helping your engine breathe deeper and run…
• Supported by AEM’s trusted warranty, providing long-lasting confidence and reliability for enthusiasts who demand…

Armor Pro Burnt End Tip

• High Quality Components
• Finish Off Your MBRP Inc. Exhaust In Style
• Clampless/No Weld Install

Armor Pro Exhaust Tip

• High Quality/Mirror Polished T304 Stainless Steel
• Finish Off Your MBRP Inc. Exhaust In Style
• Clampless/No Weld Install