Performance Parts

ID Spring Locator Set of 16 - 1.635" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator Set of 16 - 1.655" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

Ignition Wire Marker 8 mm

• Fits 8mm diameter wire

Indicator Gauge Pointer Upgrade

Quality, Service and Value are not new to us.

IN-LINE FUEL PULSE DAMPER

• Fittings included for damper/regulator’s and direct mount dampers
• Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
• Assembled and tested in the USA

Inner Bearing Cone-5;200 to 8;000-lb. Axles

• Comes With Nylon Bushings
• Industry Reference EQ-E1

Inspection Cover

• Black Oxide Steel
• Included with LK4000K
• Hardware included

Installation Kit for GM Gen V LT Accessory Drive

• No engine modification required - completely bolt-on
• Cost Effective and Proven Solution
• Utilizes conventional single sided belt

Intake Manifold Spacer

• Cast Aluminum
• Dominator To Square Bore
• 2 1/4" Height

Intake Valve for #60669 & #60689 Cylinder Heads

The Edelbrock #93661 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valve for #60779 & #60179 Cylinder Heads

The Edelbrock #9365 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valve for #77619, #77629, #77639 & #77649 Heads

The Edelbrock #9784 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valve for #77919, #77929, #77939 & #77949 Heads

The Edelbrock #93774 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #60459, #60479, #60499 & #60559 Heads

The Edelbrock #9775 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #60579, #61579 & #61599 Cylinder Heads

The Edelbrock #9780 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #60809 & #60819 Cylinder Heads

The Edelbrock #93781 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #77619, #77629, #77639 & #77649 Heads

The Edelbrock #9785 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #77919, #77929, #77939 & #77949 Heads

The Edelbrock #93775 Intakes Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Inverted flare fitting 3/8-24 for 3/16 inch line

• Manufactured to OE specifications

Inverted flare line fitting - 1/2-20 for 3/16 inch line

• Manufactured to OE specifications

Inverted Flare to AN Adapter Fitting

• Note the "L" Added to the Part Number for Long Threads - Just Before The "ERL"

Jet Assortment Kit w/Billet Plate 80-89

• Genuine Holley Quality Parts

K-Type Closed Tip Thermocouple

• Comes with everything you need
• Includes K-Type Closed Tip Thermocouple, Inconel sheath, 1/8" NPT compression fitting, 10-foot extension harness
• Sold individually

K-Type Thermocouple 10' Extention Harness

• Cut to Fit Extension
• 2 X 4-40 Hex Nut, 2 X 4-40 Screw & 6" Heat Shrink Tubing
• Sold Individually

LINE; BRAIDED STAINLESS STEEL; #3 DIA.; 3FT. LENGTH;-3AN AND 1/8in. NPTF FITTING

• For Mechanical Pressure Gauge
• 3 ft. Hose Length
• Operating Temp -65 to 450 Deg. F