Performance Parts

Fuel Level Sender

• Allow at least 1/4" clearance from end of tube to bottom of tank
• 0 ohms empty, 90 ohms full

Fuel Level Sender

• 75 ohms empty, 10 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

Fuel Level Sender

• 75 ohms empty, 10 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

Fuel Level Sender

• Allow at least 1/4" clearance from end of tube to bottom of tank
• 75 ohms empty, 10 ohms full

Fuel Level Sender

• 10 ohms empty, 180 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

Fuel Line Adapter

• -8AN Sizing For Aluminum Fuel Line Adapters
• Crimp On Style
• Straight Angle

Fuel Pressure Regulator

Edelbrock Fuel Pressure Regulator #3584 for Pro-Flo 2 and Pro-Flo XT EFI systems.

Fuel Pressure Regulator

Edelbrock Fuel Pressure Regulator #3595 (for Performer MPFI kits)

Fuel Pressure Regulator Diaphragm Kit

Replacement GFLT diaphragm with spring for alcohol applications.

Fuel Pressure Regulator Kit - Single Regulator Plate Only, Standard Flange

This Edelbrock Fuel Pressure Regulator plate #8192 is designed for standard flange Holley carburetors.

Fuel Pressure Regulator Kit with Rail Mount

Edelbrock Fuel Pressure Regulator #17401 features a unique design that allows it to be mounted directly to any fuel rail with female -6 ORB ports, which eliminates the hassle of locating a mounting place in the engine bay.

Fuel Pressure Regulator Rebuild Kit (Carbureted Applications)

Edelbrock part #178040 Carbureted Diaphragm & Hardware Rebuild Kit (for use with #174051, #174052, #174053, #174081 & #174103)

Fuel Pump Check Valve Kit

• Check valve kit for 12-815-1 fuel pump
• Includes lower gasket, check valve, spring and inlet screen filter

Fuel Pump Safety Pressure Switch

• Safety pressure switch that reads oil pressure
• Will shut off fuel pump when oil pressure drops below 5 psi
• Includes detailed instructions

FUEL SIGNAL ADAPTER FOR AUTOMETER GAUGES

• 3 Push Buttons w/LED Display For Easy Set Up
• Low Fuel Level Warning At 10 Percent
• 8 Pre-Programmed Resistance Ranges

Garage Parts Installer Series Muffler

• Get The Sound That You Want

Garage Parts Installer Series Muffler

• Get The Sound That You Want

Garage Parts Muffler Delete Pipe

• Build Your Own System
• Best Value Anywhere
• Highest Quality Anywhere

Gas Jet Assortment Kit #75 thru #110 (2 ea.)

Gas Jet Assortment Kit 75 thru 110 - Comes with (2) each of the following numbers.

Gas Jet Assortment Kit #75 thru #110 (4 ea.)

Gas Jet Assortment Kit 75 thru 110 - Comes with (4) each of the following numbers.

Gasket Pack

• Blue Non-Stick
• Two of Each
• 108-92 Fuel Bowl

Gator Brand 25-40mm Hose Clamp

Gator Brand Clamps are produced using a stainless Steel continuous band with extruded, asymmetrical threads for reliable performance.

Gator Brand 30-45mm Hose Clamp

Gator Brand Clamps are produced using a stainless Steel continuous band with extruded, asymmetrical threads for reliable performance.

Gator Brand 32-50mm Hose Clamp

Gator Brand Clamps are produced using a stainless Steel continuous band with extruded, asymmetrical threads for reliable performance.

Gator Brand 8-16mm Hose Clamp

Gator Brand Clamps are produced using a stainless Steel continuous band with extruded, asymmetrical threads for reliable performance.