Performance Parts

12 AN Bulkhead Nut

• Available for Any Plumbing Situation And Many Custom Applications

12 AN Cap

• Black Anodized

12 AN Port Plug O-Ring

These parts are included with your purchase of an RHS Race Block but are also available for purchase separately.

12 Male to -6 Male Union Reducer

• Available for Any Plumbing Situation And Many Custom Applications.

1/2" NPT Internal Plug

• Available for Any Plumbing Situation And Many Custom Applications.

15 PSIa/1 Bar Stainless Sensor Kit

• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• Connector and pins included
• Analog Data Scaled in Charts

15' Urathane Hose

• Limited Warranty 2 Year
• Made In USA
• Urethane Hose 15 ft.

15" x 15" HydraMat®, Square

• Works with Alcohol, Ethanol, Methanol, and E-85 fuels
• Works with 2-cycle oil blends as high as 20:1
• Not for use with diesel fuels

15" x 8" HydraMat®, Cross

• Works with Alcohol, Ethanol, Methanol, and E-85 fuels
• Works with 2-cycle oil blends as high as 20:1
• Not for use with diesel fuels

16AN Straight Flare To 3/4" NPT Adapter Fitting With Black Finish

• 6061-T6 Aluminum
• Precision Machined

16ORB to 3/4 in Hose Barb Aluminum Fitting, Black

• Allows for precise routing of fluid cooler lines
• Adapts -16ORB thread to 3/4-in push-on hose barb
• CNC-machined 6061 aluminum

16 Pulse VW Signal Generator

• Speedometer cable drives on the passenger side front wheel hub

1.76 Planetary Carrier

This cleverly engineered bolt-together design is available in several gear ratios and shafts, making it the most versatile planetary unit for every racing configuration.

180 Degree Coil Boots

• 180° Coil Boots - Socket Style
• Bulk Pack of 25
• Fit 8-10.4mm wires

180 Degree Dist/Coil Terminal Socket

• 180° Distributor/Coil Terminals - Socket Style
• Bulk Pack of 100
• Fit 8-10.4mm wires

180 Degree Hei Dist Boot/Tml Kit

• All boot/terminals fit 8-10.4mm
• Pack of 9

180 Degree Terminal

• 180° Spark Plug Terminal
• 8mm silicone spark plug boots
• Bulk Pack of 50

18" FLO Tank w/ Viair 444c black Compressor, 1/4" & 3/8" fittings and tank mounting hardware

• 18 Inch FLO Aluminum Tank
• Viair 444c Black Compressor
• 1/4 In And 3/8 In Tank Fittings And Tank Mounting Hardware

18 in FLO Tank Raw end caps with brushed tube Includes two mounting brackets

• Designed For A Clean And Impressive Air Management Setup

1/8" NPT Hex Head Plug

• Black Anodized

1991-1996 6AN Fitting Kit

Our TCI Transmission Cooler Fittings are Perfect for Plumbing your Transmission Oil Cooler.

1997 and Later 6AN Fitting Kit

Our TCI Transmission Cooler Fittings are Perfect for Plumbing your Transmission Oil Cooler.

1 Black Viton Valve Seal for .494" Guide Size, 11/32" Valve Stem

COMP Cams offers a complete line of valve stem Seals, from the stock GM "O-Ring" to the positive-stop PTFE Seal.

1 PTFE Valve Seal for .530" Guide Size, 11/32" Valve Stem

< ul>< li> Fits: 11/32" Valve Stems - .530" Guides (.630" Seal Diameter)</li>< li> Valves Seals keep unwanted oil from entering the combustion chamber through clearance in the valve guides</li>< li> Smaller diameter than COMP Umbrella Seals to allow use with double springs</li></ul>

1 PTFE Valve Seal for .530" Guide Size, 3/8" Valve Stem

< ul>< li> Fits: 3/8" Valve Stems - .530" Guides (.630" Seal Diameter)</li>< li> Valves Seals keep unwanted oil from entering the combustion chamber through clearance in the valve guides</li>< li> Smaller diameter than COMP Umbrella Seals to allow use with double springs</li></ul>