Performance Parts

Magnet Sleeve (only) for 1144A Ignitor Kit

• Replacement Magnet Sleeve for PerTronix 1144A (Service Part Only)

Magnet Sleeve (only) for 1281 Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix 1281 (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Magnet Sleeve (only) for 1441A Ignitor Kit

• Replacement Magnet Sleeve for PerTronix 1441A (Service Part Only)
• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Magnum 8.600" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.130" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum Polylock Set for 3/8" Rocker Stud

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Manifold Fitting

• Brass
• Made In The USA
• Sold Individually

MAP Sensor Assembly for Atomic TBI

Atomic TBI factory replacement MAP sensor.

Marine Flame Arrestor

• Marine approved per SAE J1928 standard
• Smoothes and straightens incoming air
• Washable and reusable

Max-Cool Transmission Cooler Kit for Dodge 8HP70 2015 & up Challengers/Chargers

The TCI® Max-Cool Transmission Cooler Kit addresses overheating issues sometimes seen in the 8HP70 eight-speed automatic transmission installed in 2015 and newer Challengers and Chargers.

Max-Fire Ignition HEI Coil-In-Cap in Black Finish

Edelbrock part #22743 HEI Coil-In-Cap, design is for use with GM HEI coil in-cap distributors with red and yellow primary wires.

MECHANICAL ADVANCE KIT WITH LIMITER FOR ALL FLAME-THROWER BILLET DISTRIBUTORS

• Performance mechanical advance springs.

Metering Block

Adjustable metering block for 2-barrel HP models.

Micro Switch Kit for Pro Stick Shifters

• Replacement Part
• Sold Individually
• Essential Safety Piece

Mid LSA/LS Accessory Drive Bracket Kit - Power Steering - Black

• P/S hard line adapters available (197-207)
• Compatible with Holley P/N 20-160 compact SD7 A/C kit
• Compatible with LSA and 2010-15 LS Camaro water pumps

MMBB-STBK Banjo Fitting w/Bolt M20 x 5/8 Straight, Black

• Allows for precise routing of Baffled Oil Catch Can hose
• Features M20 x 1.5 to straight push-on for 5/8-in hose
• 6061 aluminum, CNC-machined

MMOCC-SAWRD Oil Catch Can, Red, Aluminum, Small

• Separates oil particles from PCV/CCV air
• Defends intercooler, intake system, and essential components from oil blow-by
• Made from lightweight aluminum

MMRA-LC-FULLF Liquid Chill Synthetic Engine Coolant, Full Strength

• Protects against boilover to 265 F and freezing to -26 F
• Reduces engine wear
• Drops operating temperatures

Moal Bomber 2-1/8" Full Sweep Water Temperature Gauge

• Easy to read 2 5/8" size
• Push-button calibration
• Temperature sending unit included

Moal Bomber 2-1/8" Outside Air Tempature Gauge

• Pushbutton calibration
• Small 2 1/8" hole size
• Installation hardware included

Mod-Twin 225 HD Sprung Street

• "Excellence in Performance", backed by the best one-year warranty in the industry!

Mod-Twin 225 XT Sprung Race

• "Excellence in Performance", backed by the best one-year warranty in the industry!

Mod-Twin 225 XT Sprung Street

• "Excellence in Performance", backed by the best one-year warranty in the industry!

MODULAR INTERNAL IR PRINTER

• For Use w/BVA-2100 XTC-150 And XTC-160
• New Improved Printer Head
• Uses Standard 58mm Thermal Paper

Module Bypass Cable, GM HEI

Adapts MSD Distributor to harness on GM Ignition, MSD 6M-2 PN 6460, MSD 6-Offroad PN 6470 or MSD 8 Ignition PNs 7800, 7802.