Performance Parts

3" X 8" HydraMat®, Rectangle Offset Outlet

• The outlet has 6 positions to orient the HydraMat for best location in the fuel cell
• Eliminates the need for specialty reservoirs, sumps and pick up pumps saving cost and greatly reducing complexity
• Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump

40 MICRON REPLACEMENT FILTER ELEMENT 75 SERIES

• high flow, low pressure drop Compatible with E85 fuels Carbureted or EFI applications

40 MICRON REPLACEMENT FILTER ELEMENT 76 SERIES

• high flow, low pressure drop
• Compatible with E85 fuels
• Carbureted or EFI applications

40Mm Tall Upper Perch

4-1 Formed Collector 4"

Patriot Exhaust H7689 4-1 Formed Collector 2 1/8"x 4"x12"

44 Lb/Hr Pico Fuel Injector (Qty 1)

The Edelbrock #3685 is a 44 pound-per-hour Fuel Injector for the ProFlo EFI Systems.

45 Degree -6 AN Male to -6 AN Female Swivel

• Available for Any Plumbing Situation And Many Custom Applications

4 AN Plug

• Available for Any Plumbing Situation And Many Custom Applications.

4in. Round Straight-Through Performance Exhaust Muffler

• 100% Stainless Steel
• Mufflers are Bi-Directional
• Delivers a Smooth, Deep Tone

4in. Round Straight-Through Performance Exhaust Muffler

• 100% Stainless Steel
• Mufflers are Bi-Directional
• Delivers a Smooth, Deep Tone

4-PIN WIRE HARNESS/CAPACITOR FOR ALL FLAME-THROWER HEI DISTRIBUTORS AND GM 8-CYLINDER HEI DISTRIBUTORS

• Premium quality wire harness and capacitor.
• Insure good connection and "static free" operation.

500A Dual Channel Analog Current Sensor

• Good accuracy for high and low current.
• The inner diameter is 21.55mm.
• Operating Temperature Range of -40 to 257 Fahrenheit.

50 Lb/Hr Fuel Injector (Qty 8)

The Edelbrock #15901 injectors are Bosch style, standard long length (60mm O-ring to O-ring dimension), and are high impedance 50 lb/hr at 43.5 psi (300 Kpa).

50Mm Lower Spring Seat

5 BAR Brass MAP Sensor Kit

• Accurate with 3% margin for error.
• Weather resistant connector and pins included
• Analog Data Scaled in Charts

5 Male to -4 Male Union Reducer

• Blue Anodized Aluminum

5 X 8in. Oval Straight-Through Performance Exhaust Muffler

• 100% Stainless Steel
• Mufflers are Bi-Directional
• Delivers a Smooth, Deep Tone

60 Lb/Hr Fuel Injector (Qty 1)

The Edelbrock #3686 injectors have standard Bosch style O-ring to O-ring dimensions and are high impedance 61 lb/hr at 43.5 psi.

60 Lb/Hr Fuel Injector (Qty 8)

The Edelbrock #15903 is a 60 pound-per-hour Fuel Injector for the E-Street TBI, ProFlo EFI, and Edelbrock supercharger systems.

60 Lb/Hr Fuel Injector (Qty 8)

The Edelbrock #3686 injectors have standard Bosch style O-ring to O-ring dimensions and are high impedance 61 lb/hr at 43.5 psi.

6 AN Caps

• Available for Any Plumbing Situation And Many Custom Applications.

6 AN Male to 16mm x 1.50 Male

• Available for Any Plumbing Situation And Many Custom Applications.

6AN ORB 40-70 PSI FUEL PULSE DAMPER

• Compatible with any fuel -- full anodized billet aluminum construction with stainless steel springs and fluorosilicone…
• Fittings included for damper/regulator’s and direct mount dampers
• 1/8" NPT port on body of damper/regulators and in-line dampers for easy installation of mechanical pressure gauge or…

6 Super Stock™ Optional - Black Anodized

• Replacement Sleeve
• One Per Package

6 Super Stock™ Optional Sleeve

• One Per Package