Performance Parts

ID Spring Locator Set of 16 - 1.510" OD, .630" ID, .060" Thickness

ID Spring Locators for 26120

Ignition Solder and Heat seal splice kit. Contains white, red, blue, and yellow for 26-10 AWG. Waterproof, Crimpless, 2:1 shrinkage ratio, Rated up to 600V, Temp. range from -67° to 220° F.

• 40 Piece Kit
• Temperature rated at -40° C to 105° C (-40° to 221° F)
• Starting Temperature of Soldering Melt: 115° C (239° F)

IN-LINE FUEL PULSE DAMPER

• Fittings included for damper/regulator’s and direct mount dampers
• Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
• Assembled and tested in the USA

IN-LINE FUEL PULSE DAMPER

• Fittings included for damper/regulator’s and direct mount dampers
• Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
• Assembled and tested in the USA

IN-LINE FUEL PULSE DAMPER

• Fittings included for damper/regulator’s and direct mount dampers
• Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
• Assembled and tested in the USA

In-Line LED RGB Controller

• Modes include: Breathing Mode, Heartbeat Mode, Primary and Secondary Strobe Modes, Control Dimming Mode

Inner Bearing Cone; 10;000-lb. Axles; 6 Pack

• Compatible With 10000 lbs Axles
• Pairs With Bearing Race No.382A
• Compatible With Most Competitor Trailer Axle Hubs

Inner Bearing Cone-3;500 to 4;400-lb. Axles; 8 Pack

• Compatible With 3500 lbs Axles
• Pairs With Bearing Race No.L68111
• Compatible With Most Competitor Trailer Axle Hubs

Inner Bearing Race; 10;000-lb. Axles; 6 Pack

• Compatible With 10000 lbs Axles
• Pairs With Bearing No.387A
• Easy DIY Installation; Includes Six Inner Races

Inverted flare fitting 9/16-18 for 3/16 inch line

• Manufactured to OE specifications

Jet Assortment Billet Plate Only

• Genuine Holley Quality Parts

Jet Assortment Kit w/Billet Plate 70-80

Jet Assortment Kit with billet plate.

LED BULB; REPLACEMENT; T1-3/4 WEDGE; GREEN; FOR MONSTER TACH

• 2 Lumen Output
• .02 Amp Draw
• Bulb Life Expectancy 100000 Hours

LED BULB; REPLACEMENT; T1-3/4 WEDGE; RED; FOR MONSTER TACH

• 1.5 Lumen Output
• .02 Amp Draw
• Bulb Life Expectancy 100000 Hours

LED BULB; REPLACEMENT; T3 WEDGE; BLUE

• 4.5-5 Lumen Output
• .06 Amp Draw
• Bulb Life Expectancy 100000 Hours

LED BULB; REPLACEMENT; T3 WEDGE; RED

• 6.5-8 Lumen Output
• .06 Amp Draw
• Bulb Life Expectancy 100000 Hours

LED INDICATOR LIGHT KIT (2 GREEN; 1 BLUE)

• Set Of Three 5/32 in. LED Indicator Lamps; 2 Green; 1 Blue
• Ideal For Turn Signal And High Beam Lights

LINE ADAPTR-MNFLD FOR SD7 A/C COMP

• Manifold adapter allows connection to custom A/C lines

LINE; BRAIDED STAINLESS STEEL; #3 DIA.; 4FT. LENGTH;-3AN AND 1/8in. NPTF FITTING

• For Mechanical Pressure Gauge
• 4 ft. Hose Length
• Operating Temp -65 to 450 Deg. F

LINE; BRAIDED STAINLESS STEEL; #4 DIA.; 4FT. LENGTH;-4AN AND 1/8in. NPTF FITTING

• For Mechanical Pressure Gauge
• 4 ft. Hose Length
• Operating Temp -65 to 450 Deg. F

LINE; BRAIDED STAINLESS STEEL; #4 DIA.; 6FT. LENGTH;-4AN AND 1/8in. NPTF FITTING

• For Mechanical Pressure Gauge
• 6 ft. Hose Length
• 12000 PSI Burst Pressure

Line Clamp

• Widest Selection Available

Line Clamp

• Widest Selection Available

M 9100 (Bump Stop) - Suspension Bump Stop

• Filled with technology perfected over 3 decades of off-road dominance
• Monotube gas pressure design maximizes heat dissipation
• Available for lifted truck, custom truck, rock crawling and off-road racing applications

Machined Steel Set of 16 - 7 Degree, 5/16", Single Groove Race Locks

Includes 16 Pairs of Machined Steel Race Locks: 1 Groove, 7& deg