Performance Parts

GAUGE; SPEEDOMETER; 5in.; 160MPH; ELEC. PROGRAMMABLE; SPORT-COMP II

• Modern White LED Through-The-Dial Lighting
• Simple Push Button 2 Mile Drive Calibration
• Incl. Mounting Hardware/Instructions

Hi-Tech 7.500" Long, .080" Wall, 5/16" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 8.325" Long, .080" Wall, 3/8" Diameter Pushrod

Hi-Tech 8.325" Long, .080" Wall, 3/8" Diameter Pushrod - Single

ID Spring Locator Set of 16 - 1.550" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

LoadLifter 5000 Ultimate Plus Upgrade Kit

Air Lift Company now offers a kit that allows elite users to upgrade the components of their existing LoadLifter 5000 series air spring kits to those of the new LoadLifter 5000 Ultimate Plus kits.

Outer Bearing Race; 8;000-lb. Axles; 5 Pack

• Compatible With 8000 lbs Axles
• Pairs With Bearing No.2475
• Easy DIY Installation; Includes Five Outer Races

Bump Spring Hardware

Pair of Bump Spring Caps

• Locator Cap for Eibach Bump Spring
• Made By Eibach in the U.S.A.
• Sold in pairs

Speed-Flex Hyperfirm® Pre-Made Hose

• Extruded PTFE

Trailer Outer Wheel Bearing Cup-12;000-16;000-lb

• 12000 - 16000 lbs. Axle Capacity
• All Kits Include Outer Bearing With Cotter Pin/ Outer Race/Inner Race/ Inner Bearing/Grease Seal

Vapor Block Fuel Line Sleeve 0.375" (10mm) I.D. x 36" 010671

• Use On Fuel Lines To Prevent Vapor Lock
• Easy To Cut To Size
• 3/8 in. -10 mm I.D. X 36 in

WIRE HARNESS; WIDEBAND AIR/FUEL RATIO PRO; REPLACEMENT

• Replacement Bulb

Y-Blocks

• 1/8" NPT Gauge Outlet

AIR-100-300 Universal Tube

• 3 inch diameter air intake tube
• Plenty of bends and straights to build a custom air intake system
• Includes 30, 45, 60 and 90 degree tube bends

Apollo Mounting Bracket

• Provides secure mounting
• Includes L bracket and saddle bracket
• Includes hose clamp and other mounting hardware

Non Stick Fuel Bowl Gaskets

Non Stick Fuel Bowl Gaskets - For most carburetors with a metering block (4150/4160 style, Q, RQ, SS, HR, QfX Series) - Sold in pack of 10

SPE-24283 Throttle Cable Bracket

• Fully adjustable
• Fits the majority of 2 barrel and 4 barrel carburetors
• Triple chrome plated

SPE-4310 Oil Filler Cap

• OEM replacement
• Triple chrome plated steel
• Made from high quality material

SPE-8132 Spectre Conical Filter

• High flow filter designed to fit 3 inch, 3 1/2 inch and 4 inch tubes (included adapter rings)
• Factory pre-oiled and ready to use
• Red colored filter media

SPE-8148 Air Duct Mounting Plate

• Universal modular air intake
• Lightweight, high impact ABS plastic construction
• Mounts to flat surface

Specialty Muffler Heavy Duty (Truck) 3in Center Inlet/ 3in Center Outlet 6.75in Round x 24in Long Body

• Universal muffler. Reversible design.
• Long body design works well on SUV and truck applications
• Alternate muffler with Notched necks is 400500. Use 1" wide band clamps 18330.

0 Degree Retard Module

Zero degree module for use when a module is not used.

10 AMP Microswitch w/ 5/8 in Mount

These switches can be used for many things such as nitrous activation, engaging a transbrake or a rollstop.

10 Degree, 11/32", Single Groove Lock w/ Lash Cap Recess, -.050" Height

This Steel Super Lock with .050 install height features a lash cap recess, 10& deg

10 Degree Superlock Steel Retainer Set of 100 for 1.500"-1.550" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Superlock Steel Retainer for 1.437"-1.500" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.