Performance Parts

Performer Series and Thunder AVS Carburetor Metering Rods .075 x .037" (Qty 2)

The Edelbrock Metering Rods .075 X .037 Pair

Performer Series Calibration Kit for #1405 Carburetors

Edelbrock Performer EPS 1405 carburetor calibration kit

Performer Series Retainer (Qty 16)

These valve spring retainers are made from 4140L steel and have an 1.375 outer diameter with an 1.070 spring diameter.

Phenolic Carburetor Spacer - 1 Inch - Open Center

• 1" height increases plenum volume
• May increase performance in some applications
• Gaskets & installation hardware included

Pie Cut Kit

• 12 Pie Cut Pieces

Pipe/ Tube Bracket Kit 2.25in T-304 Stainless Steel

Brackets can be welded to any 2.25" diameter pipe or muffler neck, and hangers can be welded to the mounting bracket for a clean, custom look.

Plug

• 6061-T6 Aluminum
• Precision Machined

Plug

• 6061-T6 Aluminum
• Precision Machined

PowerFlex Stainless PTFE Hose

• For use with Fuel, Water, and Oils
• For use with Russell PowerFlex Hose Ends
• Stainless Steel Covering

PowerFlex Stainless PTFE Hose

• For use with Fuel, Water, and Oils
• For use with Russell PowerFlex Hose Ends
• Stainless Steel Covering

PowerFlex Stainless PTFE Hose

• For use with Fuel, Water, and Oils
• For use with Russell PowerFlex Hose Ends
• Stainless Steel Covering

Power Steering Hose - Black - Size -6 - 10 Ft

• For Use With Earl's Power Steering Hose Ends Only

Premium Metallic Federal / EPA Compliant Universal Catalytic Converter

• Durable 308 stainless steel MIG welds
• Compact, lightweight construction enables installation in confined areas, welding is required
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life

Pressure Regulator Diaphragm Kit

Pressure Regulator Diaphragm Kit - Replaces existing diaphragm with improved material.

Primary Metering Jet - .080" (Qty 2)

The Edelbrock Performer and Thunder Series Jets .080" are intended for tuning the Edelbrock Performer and Thunder Series AVS Carburetors.

Primary Metering Jet - .083" (Qty 2)

The Edelbrock Performer and Thunder Series Jets .083" are intended for tuning the Edelbrock Performer and Thunder Series AVS Carburetors.

Primary Metering Jet - .089" (Qty 2)

The Edelbrock Performer and Thunder Series Jets .089" are intended for tuning the Edelbrock Performer and Thunder Series AVS Carburetors.

Primary Metering Jet - .092" (Qty 2)

The Edelbrock Performer and Thunder Series Jets .092" are intended for tuning the Edelbrock Performer and Thunder Series AVS Carburetors.

Primary Metering Jet - .100" (Qty 2)

The Edelbrock Performer and Thunder Series Jets .100" are intended for tuning the Edelbrock Performer and Thunder Series AVS Carburetors.

Primary Metering Jet - .101" (Qty 2)

The Edelbrock Performer and Thunder Series Jets .101" are intended for tuning the Edelbrock Performer and Thunder Series AVS Carburetors.

ProClassic Crimp Collar

• For use with Russell ProClassic Crimp Hose Ends
• Light Weight Crimp Collar Design

ProClassic Crimp Collar

• For use with Russell ProClassic Crimp Hose Ends
• Light Weight Crimp Collar Design

ProClassic EFI Hose End

• 37 Deg. AN Flare
• 6061-T6 Aluminum
• Positive Anti-Leak Seal

Pro Classic Hose End

• 37 Deg. AN Flare
• 6061-T6 Aluminum
• Black Anodized Finish

Pro Classic Hose End

• 37 Deg. AN Flare
• 6061-T6 Aluminum
• Positive Anti-Leak Seal