Performance Parts

Hi-Tech 8.100" Long, .080" Wall, 3/8" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 8.100" Long, .080" Wall, 5/16" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 9.100" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech Rocker Stud Set w/ 7/16" Base Thread and 3/8" Rocker Thread

COMP Cams takes pride in having the finest Rocker arm Studs available on the market.

Hi-Temp Shrink Tubes 24mm x 50' 010853

• 3-1 Shrink Ratio
• Meets MIL Spec DTL-23053/5C
• Flame Retardant

Hi-Temp Shrink Tubes 3" (75mm) by linear foot 010857B

• 3-1 Shrink Ratio
• High Temperature Rating
• Stays Flexible

Hi-Temp Shrink Tubes 3mm/6mm/9mm x 48" 010839

• 3-1 Shrink Ratio
• Meets MIL Spec DTL-23053/5C
• Flame Retardant

HM Grade Federal / EPA Compliant Universal Catalytic Converter

• Durable 308 stainless steel MIG welds
• Compact, lightweight construction enables installation in confined areas, welding is required
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life

HM Grade Federal / EPA Compliant Universal Catalytic Converter

• Durable 308 stainless steel MIG welds
• Compact, lightweight construction enables installation in confined areas, welding is required
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life

HM Grade Federal / EPA Compliant Universal Catalytic Converter

• Durable 308 stainless steel MIG welds
• Compact, lightweight construction enables installation in confined areas, welding is required
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life

Hose Clamp

• Rubber Covered Hose Loop
• Spring Steel Tab Mount

Hose Clamp

• Rubber Covered Hose Loop
• Spring Steel Tab Mount

Hose End

• For use w/PowerFlex High PSI PTFE Hose
• Machined from Steel with Endura Finish Nickel Plating

Hose End

• For use w/PowerFlex High PSI PTFE Hose
• Machined from Steel with Endura Finish Nickel Plating

Hose/Wire Wrap

• Easy Installation And Removal
• Lightweight
• Self-Wrapping

HP Plus Disc Brake Pad

• HP Plus Compound
• Wide Temperature Range
• Fade Resistant

HPS Disc Brake Pad

• Extended Pad Life
• Low Dust
• Virtually Noise-Free

HT-10 Disc Brake Pad

• HT-10 Compound
• Optimal Temp Range
• High Temp

HVAC Filter; 14 x 18 x 1, Merv 8

• Merv 8 rating
• Easy to clean and reuse
• Lifetime limited warranty

HVAC Filter; 14 x 24 x 1, MERV 8

• Merv 8 rating
• Easy to clean and reuse
• Lifetime limited warranty

HVAC FILTER; 14 X 30 X 1, MERV 11

• Merv 11 rating
• Easy to clean and reuse
• Lifetime limited warranty

HVAC Filter; 18 x 20 x 1, MERV 8

• Merv 8 rating
• Easy to clean and reuse
• Lifetime limited warranty

HVAC Filter; 18 x 30 x 1, MERV 8

• Merv 8 rating
• Easy to clean and reuse
• Lifetime limited warranty

HVAC Filter; 20 x 22 x 1, MERV 8

• Lifetime limited warranty
• Merv 8 rating
• Easy to clean and reuse

HVAC Filter; 20 x 23 x 1, MERV 8

• Merv 8 rating
• Easy to clean and reuse
• Lifetime limited warranty