Performance Parts

Speed-Seal Hose End

• Unmatched Range-Configurations

SS4+ Brake System Rear

• CNC Machined from US Sourced Forged or Billet Aluminum
• Powder Coated Finish
• Dual Seals, Dust/Weather & Pressure

Stator - Unmolded - Harley Davidson - 15 Amp - 70-75 Big Twin

• Covered by our limited 90 Day warranty

Straight 7.400" Long, .165" Wall, 7/16" Diameter Pushrod

Hi-Tech Straight 7.400" Long, .165" Wall, 7/16" Diameter Pushrod - Single

Straight 7.950" Long, .165" Wall, 7/16" Diameter Pushrod Set

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Straight 8.150" Long, .165" Wall, 7/16" Diameter Pushrod Set

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Thread Brake Hub-Short; 10K-lb 8 on 6-1/2in.; 16-17-1/2in. Wheels; 5/8in. Studs;

• 10000 lbs. Axle Capacity
• 12-1/4 in. Brake Hub Size
• 5/8 in. Stud Size

Trailer Axle U-Bolt; 10;000-16;000-lb. Axles; 5in. Axle Tube

• 10 in. Length
• Thread End Of 5/8 in. - 11
• Suggested Nut PN[142833]

V8 Red Steelie 2-1/8" Cylinder Head Tempature Gauge

• Push button calibration
• Small 2 1/8" hole size
• Completely electric

V8 Red Steelie 5" Speedometer Gauge (140 MPH)

• V8 Red Steelie
• Stainless Low Step Bezel
• Curved Glass Lens

V8 Speedster 2-1/8" Fuel Level Gauge

• 75 ohms empty, 10 ohms full
• Small 2 ⅛" hole size
• Flat glass lens

VALVE SPRINGS, 0.953" INNER, R

Single Inner Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

Valve Spring Shim Kit - 1.437" OD, .645" ID, .015", .030", .060" Thickness

This shim kit contains .015", .030" and .060" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Velocity White 2-5/8" Outside Air Tempature Gauge

• Installation hardware included
• Easy to read 2 5/8" size
• Pushbutton calibration

40 Series Chambered Muffler

• No internal packing to blowout
• Aggressive Sound Exterior Exhaust Tone
• Durable fully welded 16 gauge aluminized steel

Accelerator Pump Nozzle Kit Includes: .024", .033", .043" Nozzles and Gaskets

The Edelbrock #1475 accelerator nozzle is designed for use with Edelbrock Performer Series as well as Thunder Series AVS carbs.

AEM DryFlow Air Filter

• Engineered to deliver enhanced horsepower & acceleration for a more exhilarating driving experience every time you hit…
• Features a performance-focused filter top that maximizes incoming airflow, helping your engine breathe deeper and run…
• Supported by AEM’s trusted warranty, providing long-lasting confidence and reliability for enthusiasts who demand…

Air Cleaner Spacer and Adapter Kit

• Eliminates Air Cleaner Fit Problems
• Helps Clear Throttle Or Transmission Linkage
• High-impact Heat Resistant Material

Apollo Mounting Bracket

• Provides secure mounting
• Includes L bracket and saddle bracket
• Includes hose clamp and other mounting hardware

Easy Level™ Fuel Level Sender

• Quickly reads fuel levels with zero contact
• Long life sensor and no failing floats
• Bolt Circle Diameter (BCD) is 2.122"

Float

• Genuine Holley Quality Parts

GAUGE; OIL PRESSURE; 2 1/16in.; 100PSI; ELECTRIC; SPORT-COMP

• 12 And 16V Compatible
• Incl. 1/8 in. NPT Pressure Sender
• Incl. 1/4 in. NPT Adapter

Pro-Flo® Universal Red Tall Conical Air Filter with 3", 3.5", and 4" Inlet

Edelbrock Universal Pro-Flo Conical Air Filter #43691 is an economical way to ensure your engine is getting clean air, without the expense of buying a new filter every few thousand miles.

Round Air Filter

• Designed for racing applications
• Dual cotton layers
• One year limited warranty

SPE-22362 Exhaust Tip

• Fits 2 to 3 inch exhaust tubing
• 4 inch outside diameter
• Includes installation hardware