Performance Parts

2.5 Gallon Aluminum Air Tank; (4) 1/4 in. face ports; 6 in. D X 20 in. L, light weight, 200PSI maximum operating pressure

• [4] 1/4 In Face Ports
• Dimensions Of 6 In D X 20 In L
• Raw Aluminum

5 Gal. Polished Tank w/ Viair 444c black compressor, 1/4" & 3/8" fittings and tank mounting hardware

• 5 Gallon Polished Aluminum Tank
• Viair 444c Black Compressor
• 1/4 In And 3/8 In Tank Fittings And Tank Mounting Hardware

All American 2-5/8" Exhaust Gas Tempature Gauge

• Completely electric
• Easy to read 2 5/8" size
• Push button calibration

All American Tradition 2-1/8" Oil Temperature Gauge

• Installation hardware included
• Small 2 1/8" hole size
• Pushbutton calibration

All American Tradition 2-5/8" Air Pressure Gauge

• Pressure transducer included
• Easy to read 2 5/8" size
• Pushbutton calibration

Autocross Gray 2-5/8" Boost/Vacuum Gauge

• Easy to read 2 5/8" size
• Pushbutton calibration
• Pressure transducer included

Autocross Yellow 2-5/8" Fuel Level Gauge (0-90 Ohm)

• Easy to read 2 5/8" size
• 0 ohms empty, 90 ohms full
• Flat glass lens

Auto-Fit Hose End

• Suitable For Most Applications

Auto-Flex Hose - Size 16 - 20 Ft. Length

• Textile Braid In Hose Liner

Axle Wheel Stud; 0.689in. Knurl; 5/8in.-18 Thread; 3-7/16in. Shoulder Length; 4

• Type Wheel Bolt
• Diameter 0.689 in. Knurl
• Thread End 0.625 in.-18

Brakes 6S, 6R & XTR Rear Caliper Rebuild Kit

• EDPM Rubber Pressure and Weather Seals
• Crush Washers & Dust Cap
• Services 1 Caliper

Brake Street S4 Disc Brake Pads for Select S4 Calipers

• Replacement Pads used in certain S4, 4-piston calipers
• Caliper hardware (8 pad abutments) sold separately.
• Sold in axle sets.

Classic Series Rear Brake Kit

• Red Powder Coated Finish
• Slot, Dimpled, Zinc Plated Rotor
• Stainless Braided Brake Hoses

Conical Seal

• Easily Installed

Dual Taper 7.850" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Easy Loom Split Wire Sleeve 0.625" x 100' 010654B100

• 16 mm-5/8 in. ID x 100 ft.
• Tested to 302°F/150°C
• Self-extinguishing

ELECTRONIC VOLTAGE REGULATOR

ACCEL Motorcycle electronic voltage regulators do not require any re-wiring or special mounting.

Engine Valve Spring

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

Engine Valve Spring

Dual Valve Springs from COMP Cams are manufactured from H11 material and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter the application.

Engine Valve Spring Kit

COMP Cams' part number 916-16, valve springs, 1.567" 2-Spring Assembly

Engine Valve Spring Kit

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

GAUGE; AIR/FUEL RATIO-PRO; 2 1/16in.; 10:1-20:1; DIGITAL W/PEAK/WARN; ES

• Domed Lens
• Quality Construction
• Black Chrome Bezel

GAUGE; BOOST CONTROLLER; 2 1/16in.; 30INHG-30PSI; INCL. SOLENOID; DIGITAL; PHANT

• EZ On-Controller Programming
• No Need For External Modules
• Peak Boost Recall

GAUGE; DUAL; WTMP/VOLT; 3 3/8in.; 250deg.F/18V; ELEC; DESIGNER BLACK

• Domed Lens
• Quality Construction
• Black Chrome Bezel

GAUGE; FUEL LEVEL; 2 1/16in.; 240OE TO 33OF; ELEC; HOONIGAN

• Hoonigan Electric Fuel Level Gauge