Performance Parts

ID Spring Locator Set of 16 - 1.350" OD, .515" ID, .130" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today.

ID Spring Locator Set of 16 - 1.510" OD, .570" ID, .060" Thickness

Lower Seat for 26120 with .570 Guide

ID Spring Locator Set of 16 - 1.540" OD, .640" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator Set of 16 - 1.550" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator Set of 16 - 1.635" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator Set of 16 - 1.655" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator Set of 32 - 1.080" OD, .440" ID, .045" Thickness

Ignition Brass Open Barrel Kit Terminal kit (326pcs). Contains Ring and Spade terminals; Female and Male Bullet Connectors; for 22-12 AWG wire;PVC covers for terminals;

• 326 Piece Kit
• Insulation Material: PVC Clear
• Wire sizes from 12 - 22 AWG

Ignition Connector kit (150pcs). Contains #6 spade terminals, Butt connector, #6&#8 ring terminals,Female and Male disconnectors for 22-14 AWG wire

• 150 Piece Kit
• Material for Ring and Spde Terminals: Tin Plated Copper
• Wire sizes from 14 - 22 AWG

Ignition Dual Wall Heat Shrink Tube Kit 106 pcs. Contains, Red and Black sleeves tube sizes from 1/8" up to 1/2" in 3" Lengths. Made of Polyolefin, Waterproof, Shrink Ratio 3:1, Rated up to 600V, and Temp. rated at -49° to 257°F

• 106 Piece Dual Wall Shrink Tube (waterproof)
• Tube Sizes from 1/8" to 1"
• Material: Polyolefin (Red and Black)

Ignition Heat shrink Terminal kit (165pcs). Contains Ring and Spade terminals; Butt connectors; Female and Male disconnects;Closed end connectors for 22-10 AWG wire(Red,Blue,Yellow).3:1 shrinkage ratio;

• 165 Piece Kit
• Polyethylene insulation (PE) with Copper Terminal Material
• Wire sizes from 10 - 22 AWG

Ignition Insulated Terminal kit (175pcs). Contains Ring and Spade terminals; Butt connectors; Female and Male disconnects for 22-10 AWG wire(Red,Blue,Yellow)

• PVC Insulated Terminals
• Temperature Rated -10° C to 105° C (-14° to 221° F)
• Wires sizes from 10-22 AWG

Ignition Wire Marker 8 mm

• Fits 8mm diameter wire

Indicator Gauge Pointer Upgrade

Quality, Service and Value are not new to us.

IN-LINE FUEL PULSE DAMPER

• Fittings included for damper/regulator’s and direct mount dampers
• Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
• Assembled and tested in the USA

Inner Bearing Cone-10;000 lbs. Axles

• Industry Number 387A
• Pairs With Inner Bearing Race
• 10000 lbs. Weight Capacity

Inner Bearing Cone-5;200 to 8;000-lb. Axles

• Comes With Nylon Bushings
• Industry Reference EQ-E1

Inner Bearing Race; 3;500-lb. Axles; 8 Pack

• Compatible With 3500 lbs Axles
• Pairs With Bearing No.L68149
• Easy DIY Installation; Includes Eight Inner Races

Inner Bearing Race-5;200 to 8;000-lb. Axles

• Industry Number 25520
• Pairs With Bearing Cone PN[25580]
• 1-3/4 In. Shaft Diameter

Inspection Cover

• Black Oxide Steel
• Included with LK4000K
• Hardware included

Installation Kit for GM Gen V LT Accessory Drive

• No engine modification required - completely bolt-on
• Cost Effective and Proven Solution
• Utilizes conventional single sided belt

Intake Manifold replacement top gasket

Edelbrock part #6988 replacement top gasket for Edelbrock #7070 intake manifolds are made to our high standards of quality and performance.

Intake Valve for #60929 & #60189 Cylinder Heads

The Edelbrock #9640 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valve for #77919, #77929, #77939 & #77949 Heads

The Edelbrock #93774 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #60069 & 60079 Cylinder Heads

The Edelbrock #9755 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.