Performance Parts

10 Degree Superlock Steel Retainer Set of 100 for 1.437"-1.500" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10in. Brake Hub with Bearing Kit; 3;500-lb. Axles; 5 on 4-1/2in. Bolt Pattern

• Axle Rating 3500 lbs.
• Wheel Size 13 To 15 in.
• Stud Size 1/2 in.

10 Steel Retainer w/ +.050" Installed Height for 26095 Beehive Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Titanium Retainer Set of 16 for 1.625" OD 26091 Springs

Upgrading to these 10& deg

1 Metal Body Viton Valve Seal for .530" Guide Size, 11/32" Valve Stem

11/32" Viton Metal Body Seal for use with Triple Spring with a Total OD of .575"

2.5 Gal. Polished Tank w/ Viair 444c black compressor, 1/4" & 3/8" fittings & tank mounting hardware

• 2.5 Gallon Polished Aluminum Tank
• Viair 444c Black Compressor
• 1/4 Inch And 3/8 Inch Tank Fittings And Tank Mounting Hardware

4 AN Caps

• Blue Anodized Aluminum

All American 2-1/8" Fuel Level Gauge (1975-2010 Ohm)

• 75-10 OHM
• Curved Glass Lens
• Stainless Radial Bezel

All American Tradition 2-1/8" Fuel Level Gauge

• Pushbutton calibration
• Small 2 ⅛" hole size
• Installation hardware included

All American Tradition 3-3/8" Speedometer Gauge

• 3 3/8" Diameter
• Stainless High Step Bezel
• Curved Glass Lens

ANALYZER/TESTER HANDHELD

• Battery CCA Range - 0-1600
• V-Drop Technology
• Perfect Tool Box Tester

AutoCross Gray 2-5/8" Short Sweep Water Temp Gauge

• Flat glass lens.
• 2 5/8" Short sweep
• Matte-black performance bezel

Brakes S4 (1.750") Caliper Rebuild Kit

• EDPM Rubber Pressure and Weather Seals
• Crush Washers & Dust Caps
• Services 1 Caliper

Brakes T4 Caliper Rebuild Kit

• EDPM Rubber Pressure and Weather Seals
• Stainless Steel Brake Pad Abutment Clips
• Services 1 Caliper

CI Drive 2.0 Cable

• High quality cable drive
• Threaded end for CI DRIVE 2.0 interface

Double-Eye Leaf Spring Trailer Equalizer; 1-3/4in. Spring Width; 33in. Axle Spac

• Comes With Nylon Bushings
• Industry Reference EQ-310

DUAL SPRING W/ DAMPER, 1.560 OD, 1.900 IH, .740 LIFT, 400 LBS/IN, HR

Extreme+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

FAE Wideband "Replacement" Sensor

• Replacement for 0300 with 0400 serial number
• Improved durability compared to Bosch 4.9.
• Faster response time.

FITTING; ADAPTER; 3/8in. NPT MALE; EXTENSION; BRASS; FOR AUTO GAGE MECH. TEMP.

• Temperature Extension
• Manufactured From High Quality Brass
• For Mechanical Temperature Gauges Only

Floor & Tunnel Shield II 12" x 21"

• 10 mil dimpled aluminum face
• Only 3/16" thick
• Peel and stick adhesive backing

GAUGE; AIR LOCKER PRESS; 2 1/16in.; 150PSI; MECHANICAL; ULTRA-LITE

• No Electrical System Required
• Mechanical Movement Provides Accuracy And Durability
• Incl. 1/8 in. Nylon Line; 1/8 in. NPT Adapter

GAUGE; BOOST; 2 1/16in.; 100PSI; STEPPER MOTOR W/PEAK/WARN; SLVR/CHRM; SPEK-PRO

• 7 Color User Selectable
• Precision 280 Brushless Stepper Motor
• High And Low Warning Settings

GAUGE; BOOST; 2 1/16in.; 35PSI; STEPPER MOTOR W/PEAK/WARN; BLK/CHROME; SPEK-PRO

• 7 Color User Selectable
• Precision 280 Brushless Stepper Motor
• High And Low Warning Settings

GAUGE BRACKET KIT; 2 1/16in.; ALUMINUM; QTY 3

• Includes 3 Aluminum Mounting Brackets
• Includes 6 Lockwashers
• Includes 6 Aluminum Thumb Nuts