Performance Parts

Ignition Connector kit (150pcs). Contains #6 spade terminals, Butt connector, #6&#8 ring terminals,Female and Male disconnectors for 22-14 AWG wire

• 150 Piece Kit
• Material for Ring and Spde Terminals: Tin Plated Copper
• Wire sizes from 14 - 22 AWG

Ignition Dual Wall Heat Shrink Tube Kit 106 pcs. Contains, Red and Black sleeves tube sizes from 1/8" up to 1/2" in 3" Lengths. Made of Polyolefin, Waterproof, Shrink Ratio 3:1, Rated up to 600V, and Temp. rated at -49° to 257°F

• 106 Piece Dual Wall Shrink Tube (waterproof)
• Tube Sizes from 1/8" to 1"
• Material: Polyolefin (Red and Black)

Ignition Insulated Terminal kit (175pcs). Contains Ring and Spade terminals; Butt connectors; Female and Male disconnects for 22-10 AWG wire(Red,Blue,Yellow)

• PVC Insulated Terminals
• Temperature Rated -10° C to 105° C (-14° to 221° F)
• Wires sizes from 10-22 AWG

Indicator Gauge Pointer Upgrade

Quality, Service and Value are not new to us.

IN-LINE FUEL PULSE DAMPER

• Fittings included for damper/regulator’s and direct mount dampers
• Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
• Assembled and tested in the USA

IN-LINE FUEL PULSE DAMPER

• Fittings included for damper/regulator’s and direct mount dampers
• Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
• Assembled and tested in the USA

Inner Bearing Cone-10;000 lbs. Axles

• Industry Number 387A
• Pairs With Inner Bearing Race
• 10000 lbs. Weight Capacity

Inner Bearing Cone-5;200 to 8;000-lb. Axles

• Comes With Nylon Bushings
• Industry Reference EQ-E1

Inner Bearing Race; 3;500-lb. Axles; 8 Pack

• Compatible With 3500 lbs Axles
• Pairs With Bearing No.L68149
• Easy DIY Installation; Includes Eight Inner Races

Inner Bearing Race-5;200 to 8;000-lb. Axles

• Industry Number 25520
• Pairs With Bearing Cone PN[25580]
• 1-3/4 In. Shaft Diameter

Installation Kit for GM Gen V LT Accessory Drive

• No engine modification required - completely bolt-on
• Cost Effective and Proven Solution
• Utilizes conventional single sided belt

Intake Manifold Spacer

• Cast Aluminum
• Dominator To Square Bore
• 2 1/4" Height

Intake Valve for #60929 & #60189 Cylinder Heads

The Edelbrock #9640 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #60069 & 60079 Cylinder Heads

The Edelbrock #9755 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #60379 Cylinder Heads

The Edelbrock #9768 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #60459, #60479, #60499 & #60559 Heads

The Edelbrock #9775 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #60579, #61579 & #61599 Cylinder Heads

The Edelbrock #9780 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #77919, #77929, #77939 & #77949 Heads

The Edelbrock #93775 Intakes Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Inverted flare fitting 9/16-18 for 1/4 inch line

• Manufactured to OE specifications

Inverted flare line fitting - 1/2-20 for 3/16 inch line

• Manufactured to OE specifications

Inverted Flare to AN Adapter Fitting

• Note the "L" Added to the Part Number for Long Threads - Just Before The "ERL"

IronSport Brake System Rear

• Single Piston Caliper
• Silver Zinc-Plated Finish
• Integral Park Brake in Caliper

Jet Assortment Kit w/Billet Plate 60-69

• Genuine Holley Quality Parts

Jet Assortment Kit w/Billet Plate 70-79

• Genuine Holley Quality Parts

Jet Assortment Kit w/Billet Plate 70-80

Jet Assortment Kit with billet plate.