Performance Parts

135 Degree Boot/Terminal Kit Blue

• Color: Blue
• All boot/terminals fit 8-10.4mm
• Pack of 8

25Mm Upper Perch

Adel Mount Clamps - 3/4 Inch - 6 Pieces

Insulating with Adel 75005 compound means easier mounting of wire, fuel hoses, etcetera, to any solid surface.

Battery Eliminator Kit

Boost spark voltage at cranking and eliminate flickering lights at low speed with ACCEL Motorcycle battery eliminator.

Bellhousing Bolt Kit - Mopar Gen III Hemi to T-56 and T-56 Magnum

• Fasteners for both engine and transmission side
• Entire kit consists of 10.9 / Grade 8 bolts
• Included in purchase of LK7100K Bellhousing

BMS - Unsealed Satellite Install Kit

• Included 25 x 36” Tap leads
• Included PCB connector
• Save time crimping

Brakes Premium Aluminum 5-Lug Wheel Spacers – 5x5.0, 5x5.50 Bolt Patterns

• Zinc plated steel
• Widen Track
• Sold in Pairs

Carb Metering Rod #1956 Size .071 x .042 AVS2, Performer & Thunder Carbs (Pair)

The Edelbrock Metering Rods .071 X .042 Pair

CLOCKWISE VACUUM LOCKOUT FOR ALL FLAME-THROWER HEI DISTRIBUTORS AND GM 8-CYLINDER HEI DISTRIBUTORS

• For closed course competition use only, not to be used on emission controlled vehicles.
• These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.
• Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.

Dual Channel Multifunction Remote

• Designed to control multiple LED accessories

Dynomation-5 Wave Action Engine Simulation Software

Look inside a running engine, and learn where and how it makes power with Dynomation-6 Wave Action Simulation.

Econ-O-Fit Hose Clamp Size 7 I.D. 21/32 in. Red - Clamshell Package

Econ-O-Fit is the original anodized aluminum hose clamp cover.

Flame-Thrower HEI III GM 4 Pin Module with multiple sparks and digital rev-limiter

• Multiple sparks thru the entire RPM range.
• Legal in all 50 states and Canada.( C.A.R.B. E.O. #D-57-22)*
• Senses startup and increases energy for quicker, easier starting.

Gator Brand 16-25mm Hose Clamp

Gator Brand Clamps are produced using a stainless Steel continuous band with extruded, asymmetrical threads for reliable performance.

GAUGE; NITROUS PRESS; 2 1/16in.; 1600PSI; STEPPER MTR W/PK/WRN; BK/SMK/BK; SPEK

• 7 Color User Selectable
• Precision 280 Brushless Stepper Motor
• High And Low Warning Settings

In-Line LED Amplifier

• Increases the load capability and extends the signal of any universal RGB controller.

Line Adapter Manifold for SD7 A/C Compressor - SBF, Driver Side Exit

• Allows optional routing for A/C lines with Holley's SBF accessory drive

End Link Kit

Pair of Adjustable End Links

• Chromoly Rod Ends and Easy to Adjust Hex Bodies
• Sold as a pair
• Made in the U.S.A.

Performance Exhaust 6812W Oxygen Sensor Extension Wires

• 8.5Inch length
• Trapezoid Plug
• 10-15 Chevrolet/GM Vehicles

Power Steering Hose End

• Stainless Steel (or Nickel Plated, or Black Chromate Finish – depending on the part number)

Power Steering Hose End

• Nickel Plated

Power Steering Hose End

• Stainless Steel (or Nickel Plated, or Black Chromate Finish – depending on the part number)

Precision-Flow Fuel Injector (42 lb/hr)

• Flow matched to 2%
• Multi-point Dynamic Flow Testing
• Excellent Fuel Atomization

Reducer

• Bolt-On Reducer
• 3-Bolt Flange
• Non-fixed flange

Reducer

• Bolt/Slip-On Reducer
• Kit contains "one pair".
• 3-Bolt Flange