Performance Parts

CAN-Bus Termination Cap

• For use with Power Grid Controller
• 4-Connector CAN-Bus Hub required

Carb Adapter #8716 4150 Standard-Flange Carb to 4500 Manifold Flange 2 in.

The Edelbrock Standard Flange Adapter #8716 adapts 4150 Series standard-flange carburetor to 4500 Series intake manifold flange.

Carb Adapter Mounts Quadrajet to Square Bore Single-Plane Manifold

The Edelbrock Carburetor Adaptor #2692 is designed mounts 4-bbl.

Carburetor Accelerator Linkage #1473 for AVS2 & Performer Carbs, Gold Iridited

The Edelbrock Performer Series (EPS) Linkage Kit (Includes 1 ea. of 7 Links and 6 Retaining Clips)

Carburetor Spacer #8712 Open Center 2in Thick

The Edelbrock Carburetor Spacer #8712 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance.

Carburetor Spacer #8715 Divided Center 1/2in Thick For 2-Plane Manifolds

The Edelbrock Carburetor Spacer #8715 divided design is for use with Dual-Plane Design intake manifolds.

Carburetor Spacer #8723 4-Hole 1/2in Thick

The Edelbrock Carburetor Spacer #8723 4-hole design enhances low-rpm torque and throttle response and dampen reversion effects on the carb.

Carburetor Spacer #8724 Open Center 1/2in Thick

The Edelbrock Carburetor Spacer #8724 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance.

Carburetor Spacer Kit - 1 Inch Ported Center

• Fits Holley And Carter Square Bore Carburetors
• 1 Inch Height
• Light Weight Design w/ edges Open & Ribbing

Carburetor Spacer Kit - 1 Inch with 3/8 Inch PCV Tube

• Increases power, torque and performance
• Includes mounting hardware
• 1˝ Open Center w/3⁄8˝ PCV tube

Carburetor Spacer Kit - Open Center - Aluminum - 2 Inch

2 inch Open Center.

Carburetor Throttle Plate Kit

• Includes Four 2" Plates and Eight Screws

Carburetor Throttle Plate Kit

• Includes 4 Plates and 8 Screws

Carburetor Throttle Plate Kit

• Includes 4 Plates and 8 Screws

Carburetor Throttle Plate Kit

• Includes 4 Plates and 8 Screws

Carburetor Throttle Plate Kit

• Includes 4 Plates and 8 Screws

Cast Stainless Steel Y Splitter - 76mm (3") to Dual 63.5mm (2.5")

• CNC-machined connection points
• 150 degrees transition
• 76mm (3”) clamp mounting point

CD-7/CD-7L Plug & Play Adapter Harness

• Comes with 3M tape for mounting on any flat surface
• Magnetic: can be mounted on flat metal surfaces
• Replacement antenna for GPS equipped CD-5/7 Digital Displays

CD Dash Plug & Play Adapter Harness

• Able to select and prioritize available channels for best possible transfer speed
• Ideal for track day enthusiasts - get channels from OBDII CAN for datalogging!
• Dash can still be used with additional auxiliary CAN devices.

Channel 2, O2 Sensor, Harness, and Bung Kit for Part Number 7766

The Dual Wide-Band O2 sensor module is capable of measuring AFR as low as λ = 0.5 (7.35:1 Gasoline AFR equivalent).

CHARGER/TESTER XPRESS 200 AMP

• Fast Charging Technology
• Combination Battery Tester And Fast Charger
• Stores Previous 100 Tests For Easy Review

Charging System Kit - 38 Amp - Twin Cam

What better way to insure plenty of juice when you need it than to install a complete ACCEL Motorcycle 38 amp charging system featuring the top quality ACCEL components and limited 90 day replacement warranty.

Check Valve - 1/4 in. FNPT - SMC # AK2000-N02

• Check Valve 1/4 In FNPT - SMC AK2000-N02

Choke Control Cable Hardware

• Manual Choke
• Cable Clamp Kit
• Black Finish

Choke Conversion Kit

• w/Mounting Hardware
• Shiny Finish