Performance Parts

Ignition Weather Pack connector kit 209 pcs. Contains 1,2,3,4, and 6 pole Receptacles; Pins and Seals for 24-10 AWG wire; and a weather pack terminal release tool

• 209 Piece Kit
• Connector has locking mechanism that align terminal and seal
• Temperature rated at -40° C to 120° C (-40° to 248° F)

Ignition Wire Marker - 8mm - 8.8mm

Identify your wires to eliminate firing order errors.

INFRA RED EXTERNAL PRINTER; 12V

• Uses Standard 58mm Thermal Paper
• Incl. AC Power Adapter And 110V Cigar Lighter Power Adapter
• 6 in. x 4.5 in. x 3.5 in.

IN-LINE FUEL PULSE DAMPER

• Fittings included for damper/regulator’s and direct mount dampers
• Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
• Assembled and tested in the USA

In-Line LED RGB Controller

• Modes include: Breathing Mode, Heartbeat Mode, Primary and Secondary Strobe Modes, Control Dimming Mode

Inner Bearing Cone; 10;000-lb. Axles; 6 Pack

• Compatible With 10000 lbs Axles
• Pairs With Bearing Race No.382A
• Compatible With Most Competitor Trailer Axle Hubs

Inner Bearing Cone-12;000 to 16;000 lbs. Axles

• Industry Number 3984
• Pairs With Outer Bearing Cone
• 12000 To 16000 lbs. Weight Capacity

Inner Bearing Race; 10;000-lb. Axles; 6 Pack

• Compatible With 10000 lbs Axles
• Pairs With Bearing No.387A
• Easy DIY Installation; Includes Six Inner Races

Intake Valves for #60979 Cylinder Heads

The Edelbrock #9779 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Inverted flare plug 3/8-24

• Manufactured to OE specifications

Jet Assortment Billet Plate Only

• Genuine Holley Quality Parts

LED BULB; REPLACEMENT; T1-3/4 WEDGE; RED; FOR MONSTER TACH

• 1.5 Lumen Output
• .02 Amp Draw
• Bulb Life Expectancy 100000 Hours

LED BULB; REPLACEMENT; T3 WEDGE; AMBER

• 9.8-11 Lumen Output
• .06 Amp Draw
• Bulb Life Expectancy 100000 Hours

LED INDICATOR LIGHT KIT (2 GREEN; 1 BLUE)

• Set Of Three 5/32 in. LED Indicator Lamps; 2 Green; 1 Blue
• Ideal For Turn Signal And High Beam Lights

Lifter Valley Standpipe - Set of 8

These standpipes help maintain a healthy oil level in the valley of your Small Block Chevrolet.

LINE ADAPTR-MNFLD FOR SD7 A/C COMP

• Manifold adapter allows connection to custom A/C lines

LINE; BRAIDED STAINLESS STEEL; #4 DIA.; 6FT. LENGTH;-4AN AND 1/8in. NPTF FITTING

• For Mechanical Pressure Gauge
• 6 ft. Hose Length
• 12000 PSI Burst Pressure

Line Clamp

• Widest Selection Available

Liquid Chill Synthetic Engine Coolant, Premixed

• Protects against boilover to 265 F and freezing to -26 F
• Reduces engine wear
• Drops operating temperatures

Lower Structure Support for Gen III Hemi Engines and Transmissions

• Reduces vibration and noise
• Rigid cast aluminum design with a natural as-cast aluminum finish
• Bolts on over existing oil pan with included fasteners

LS COOLING MANIFOLD RAW

• Genuine Holley Quality Parts

LS COOLING MANIFOLD RAW A/C Delete

• Genuine Holley Quality Parts

LS/LT High-Mount Accessory Drive Bracket - Driver's Side P/S & Alt Bracket

• The most cost effective LS bracket solution on the market!
• Utilizes commonly available and affordable GM alternators and power steering pumps
• Ideal for crate engines, take out motors and engine builders!

LS/LT High-Mount Accessory Drive Bracket - Passenger's & Driver's Side Brackets

• The most cost effective LS bracket solution on the market!
• Simple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets
• A/C bracket accepts GM R4 compressor (Sanden version now available)

LT COOLING MANIFOLD RAW-A/C and P/S Delete

• Genuine Holley Quality Parts