Performance Parts

Heater Hose End Fitting - Straight with 1/2" NPT and 3/8" Barb

Edelbrock part #8185 heater hose end is designed to hold up to any plumbing task you have.

Pro Sleeve Boot Guards - Fiberglass Spark Plug Wire Boot Protectors - 4 pack

• Helps protect wires from extreme heat
• Great for use with headers
• 6" Length

RACE (yellow) 8610 SERIESs- externally adjustable racing strut insert

KONI Race 8610 series, yellow painted, externally rebound adjustable strut insert cartridge.

Spark Plug Wire Separator Kit #22799, Set of 6

Edelbrock Wire Separator Kit #22799 will organize spark plug wires on 4-, 6- and 8-cylinder engines and includes six separators (two 2-wire, two 3-wire and two 4-wire) designed to work with wire diameters up to 8.5mm.

SPE-4348 Fan Shroud

• Easy to install
• Hardware included
• 20 inch diameter

90-Degree Silicone Transition Coupler, 2.00-in to 2.25-in, Black

• Allows for easy routing of complex coolant or intercooler pipes
• 100-percent silicone construction
• Constructed from four layers of silicone with embedded heat-resistant fibers

Exhaust Tip

• Weld-on
• Angle Cut Rolled Edge
• 304S Stainless Steel Inner Core

SD508 A/C Compressor

• Pre-filled with the correct oil type

Velocity Black 2-5/8" Air Fuel Ratio Gauge

• Full sweep provides increased accuracy
• Easy to read 2 5/8" size
• Push-button calibration

Velocity White 2-5/8" Fuel Level Gauge (240-33 Ohm)

• Easy to read 2 5/8" size
• 240 ohms empty, 33 ohms full
• Flat glass lens

Worm Gear Clamp, High-Torque, Gold, 0.55in-1.06in (14mm-27mm), Pack of 10

• Securely clamps pipes, couplers, and hoses with an outer diameter from 0.55- 1.06-in (14mm-27mm)
• Worm gear design for quick and easy tightening
• Stainless steel construction resists corrosion longer than zinc-plated clamps

ProXS Muffler 2.25in Offset Inlet/ 2.25in Center Outlet 4in x 9.5in Oval x 14in Long Body

• Universal muffler. Reversible design.
• Alternate muffler with Notched necks is 400478. Use 1" wide band clamps 18322.
• Alternate muffler with Notched necks is 400478. Use 1" wide band clamps 18322.

ProXS Muffler 2.5in Center Inlet/ 2.5in Center Outlet 4in x 9.5in Oval x 14in Long Body

• Universal muffler. Reversible design.
• Alternate muffler with notched necks is 400496. Use 1" wide band clamps 18325.
• Alternate muffler with notched necks is 400496. Use 1" wide band clamps 18325.

SPE-4765 Air Filter Base Plate

• Flat base with an outside diameter of 14 inches
• Filter base sits 5/8 inch above the carburetor
• Alternative for applications where drop bases won’t fit

SPE-8162 Spectre Conical Filter

• Factory pre-oiled and ready to use
• Includes adapter rings
• Red synthetic air filter media

XR-1 Sportsman Racing Muffler 3in Center Inlet/ 3in Center Outlet 4.5in x 7.88in Oval x 16in Long Body

• Universal muffler. Reversible design.
• 3" Center Inlet/ 3" Center Outlet 4.25" x 7.88" Oval x 16" Long Body 21" Overall Length
• Compact size is perfect for applications with limited space

Classic Digital Fuel Pressure Gauge Kit

• Ideal for carbureted or EFI vehicles
• Three digit readout in center
• Brass sensor included

Pro Classic Hose End

• 37 Deg. AN Flare
• 6061-T6 Aluminum
• Positive Anti-Leak Seal

Spring Rubber

Single Spring Rubber

• Fits springs with 2.50" inside diameters.
• Adds approximately 0.75" of solid height to your spring.
• Made in the U.S.A. and sold individually.

Spring Rubber

Single Spring Rubber

• Fits springs with 5.0" outside diameters.
• Adds approximately 1.5" of solid height to your spring.
• Made in the U.S.A. and sold individually.

V3 Water/Methanol HD Controller Kit

• 40PSI rated HD controller.
• Color coded harness for ease of installation.
• System status LED on controller.

X-Series Inline Wideband AFR Controller Kit

• Patented X-Digital technology (Patent 9,575,030)
• Includes Bosch 4.9LSU wideband UEGO sensor
• Weather-resistant, low profile design

DTC-60 Disc Brake Pad

• DTC-60 Compound
• High Temp
• High Torque

GAUGE; TACHOMETER; 2 5/8in.; 8K RPM; PEDESTAL; TRADITIONAL CHROME

• 12 And 16V Compatible
• Compatible w/2-4 Pulse Ignition Signals
• Incl. Mounting Hardware/Instructions

Performance Ceramic Disc Brake Pad

• Increased Rotor Life
• Ultra-Low Dust
• Extremely Quiet