Performance Parts

Hose & Tubing Separator

• For Professional Engine Look

Hot Rod Kit 2.5in O.D. T-304 Stainless Steel

• If clamping, use wide (2 bolt style) band clamps
• If clamping, use wide (2 bolt style) band clamps
• Brushed finish can be polished prior to installation

HP Plus Disc Brake Pad

• HP Plus Compound
• Wide Temperature Range
• Fade Resistant

HPS 5.0 Disc Brake Pad

• Improved Pedal Feel
• Gentle On Rotors
• Extended Pad Life

HPS Disc Brake Pad

• Extended Pad Life
• Low Dust
• Virtually Noise-Free

HVAC Filter; 18 x 20 x 1, MERV 11

• Merv 11 rating
• Easy to clean and reuse
• Lifetime limited warranty

Ignition Primary Wire Extension Kit

• Primary Wire Extension Kit can be used to increase the wire length of our point conversion kits or distributors.
• Kit includes 39" of our quality 20 guage silicone jacketed red and black wire, ring terminals, quick disconnect…

Inner Bearing Cone; 12;000-16;000-lb. Axles; 4 Pack

• Compatible With 12000 To 16000 lbs Axles
• Pairs With Bearing Race No.3920
• Compatible With Most Competitor Trailer Axle Hubs

Inner Bearing Race; 12;000-16;000-lb. Axles; 6 Pack

• Compatible With 12000 To 16000 lbs Axles
• Pairs With Bearing No.3984
• Easy DIY Installation; Includes Six Inner Races

Lake Pipe Plug Kit

Patriot Exhaust H1285 Lake Pipe Plug Kit Chrome

LTS Disc Brake Pad

• Improved Braking Over OE
• Superior Fade Resistance
• Virtually Noise-Free

Magnet Sleeve (only) for 1122 Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix 1122 (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Magnet Sleeve (only) for 1162A Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
• Replacement Magnet Sleeve for PerTronix 1162A (Service Part Only)

Magnet Sleeve (replacement) for PerTronix Industrial Electronic Distributor

• Replacement magnet sleeve for PerTronix Industrial Distributors: D41-01A, D41-05A, D41-09B, D41-10B, D41-11B, D41-19A…

Male Quick Connectors (16-14 Wire Gauge; 100-Pack)

• Flared Opening Allows For Easy Wire Insertion
• Male End Fits Female Quick Connectors #59592
• Color-Coded Blue Connectors Fit 16-14 Gauge Wires

OEM Grade Federal / EPA Compliant Universal Catalytic Converter

• Durable 308 stainless steel MIG welds
• Compact, lightweight construction enables installation in confined areas, welding is required
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life

Off-Road LED Whip Replacement Power Plug

• Sold Individually

Outer Bearing Cone; 6;000-lb. Axles; 7 Pack

• Compatible With 6000 lbs Axles
• Pairs With Bearing Race No.15245
• Compatible With Most Competitor Trailer Axle Hubs

Outer Bearing Cone; 7;000-lb. Axles; 6 Pack

• Compatible With 7000 lbs Axles
• Pairs With Bearing Race No.14276
• Compatible With Most Competitor Trailer Axle Hubs

Outer Bearing Cone; 8;000-lb. Axles; 5 Pack

• Compatible With 8000 lbs Axles
• Pairs With Bearing Race No.2420
• Compatible With Most Competitor Trailer Axle Hubs

Outer Bearing Race; 6;000-lb. Axles; 6 Pack

• Compatible With 6000 lbs Axles
• Pairs With Bearing No.15123
• Easy DIY Installation; Includes Six Outer Races

Performance Exhaust 12-08257 2.5" x 4" x 5 3/4"" Double Wall Polished S/S Chrome Tip - Clamp on

• High quality double wall
• 304 Stainless Steel Contruction
• Features the JBA Performance logo

Performance Exhaust 12-08258 3" x 4" x 5 3/4" Double Wall Polished S/S Chrome Tip - Clamp on

• High quality double wall
• 304 Stainless Steel Contruction
• Features the JBA Performance logo

Performance Exhaust 40-251300 "Universal" Chambered Style 304SS Muffler 13"x9.75"x4" 2.5" Inlet Diameter Offset/Offset

• Variety of styles, lengths and diameters
• Stainless Steel Construction

Power Grip Hose Clamp (O.D. 2.00"-2.25")

Edelbrock part #8462 hose clamps have a unique maintenance-free design retain tension and never needs retightening.