Performance Parts

Dual Taper 7.850" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Engine Valve Spring

Dual Valve Springs from COMP Cams are manufactured from H11 material and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter the application.

Fuel Level Sender

• 0 ohms empty, 90 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

GAUGE; BOOST; 2 1/16in.; 35PSI; MECHANICAL; TRADITIONAL CHROME

• Incandescent Lighting Illuminates Around Perimeter Of Dial
• Mechanical Movement Provides Accuracy And Durability

GAUGE; BOOST CONTROLLER; 2 1/16in.; 30INHG-30PSI; INCL. SOLENOID; DIGITAL; PHANT

• EZ On-Controller Programming
• No Need For External Modules
• Peak Boost Recall

GAUGE; BRAKE PRESS; 2 5/8in.; 1600PSI; DIGITAL STEPPER MOTOR; ULTRA-LITE

• 12 And 16V Compatible
• Incl. Wiring Harness
• Incl. Mounting Hardware/Instructions

GAUGE; OIL TEMP; 2 1/16in.; 140-280deg.F; DIGITAL STEPPER MOTOR; COBALT

• Striking New Look
• 1 Year Limited Warranty
• 12 And 16 Volt Compatible

GAUGE; QUAD; 5in.; 0OE-90OF; ELEC; OLD TYME BLACK

• 4 In 1 Gauge Design
• 12 And 16V Compatible
• Provide Quick And Accurate Readings

GAUGE; SPEEDOMETER; 3 3/8in.; 160MPH; ELEC. PROGRAMMABLE; CHEVY RED BOWTIE; BLAC

• Red Pointer For Quick Glance Monitoring
• 1 Year Limited Warranty
• Modern LED Through The Dial Lighting

GAUGE; SPEEDOMETER; 5in.; 160MPH; ELEC. PROGRAMMABLE; GT

• Real Carbon Fiber Construction
• Air-Craft Inspired Design
• Modern White LED Through-The-Dial Lighting

GAUGE; SPEEDOMETER; 5in.; 200MPH; MECHANICAL; ULTRA-LITE

• Traditional Rolling Drum Odometer
• Calibrated For 60MPH At 1000 Cable RPM
• Incl. Mounting Hardware/Instructions

GAUGE; SPEEDOMETER; 5in.; 225KM/H; GPS; Z-SERIES

• 12 And 16V Compatible
• Incl. Wiring Harness
• For Use w/1994-2003 Ford 7.3L Powerstroke Engine

GAUGE; TACH/SPEEDO; 5in.; 160MPH/8K RPM; ELEC. PROGRAM.; SPORT-COMP

• Sport-Comp™Quad Gauge/Tach/Speedo Kit

GAUGE; VAC/BOOST; 2 1/16in.; 30INHG-15PSI; STEPPER MOTOR W/PEAK/WARN; PHANTOM

• 12 And 16V Compatible
• Incl. Mounting Hardware/Instructions
• One-Touch Peak Recall

GAUGE; VOLTMETER; 2 1/16in.; 16V; STEPPER MOTOR W/PEAK/WARN; BLK/CHRM; SPEK-PRO

• 7 Color User Selectable
• Precision 280 Brushless Stepper Motor
• High And Low Warning Settings

GAUGE; VOLTMETER; 2 1/16in.; 18V; ELECTRIC; MARINE SILVER

• 12 And 16V Compatible
• 12 Month Limited Warranty
• Quick And Accurate Readings

G/Stock 2-5/8" Water Temperature Gauge, APF-3/8

Quality, Service and Value are not new to us.

Hardened Steel Set of 8 - 7 Degree, 11/32", Single Groove Street Locks

Includes 8 Pairs of hardened Steel Street Locks: 1 Groove, 7& deg

HD/Race Sprung 6 Pad Kit

• "Excellence in Performance", backed by the best one-year warranty in the industry!

Hi-Tech 210 Radius 8.050" Long, .080" Wall, 3/8" Diameter Pushrod Set

Designed for high lift Applications where Pushrod and seat interference are problems at maximum lift, Hi-Tech 210& deg

Hi-Tech 7.700" Long, .080" Wall, 3/8" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Temp Shrink Tubes 9mm x 50' 010850

• 3-1 Shrink Ratio
• Meets MIL Spec DTL-23053/5C
• Flame Retardant

ID Spring Locator - 1.540" OD, .640" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

LOADLIFTER 5000; LEAF SPRING LEVELING KIT

• Eliminates Sag And Bottoming Out
• Uses 2-Ply Fabric Reinforced Air Springs
• Limited Lifetime Warranty

Magnum 7.450" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.