Performance Parts

90-Degree Silicone Transition Coupler, 2.00-in to 2.25-in, Black

• Allows for easy routing of complex coolant or intercooler pipes
• 100-percent silicone construction
• Constructed from four layers of silicone with embedded heat-resistant fibers

All American Nickel 2-5/8" Air Pressure Gauge

• Pushbutton calibration
• Pressure transducer included
• Easy to read 2 5/8" size

HM Grade Federal / EPA Compliant Universal Catalytic Converter

• Durable 308 stainless steel MIG welds
• Compact, lightweight construction enables installation in confined areas, welding is required
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life

Metric Coilover Spring

Single Spring

• Available in Linear or Progressive Rates
• Each Spring Individually Tested
• Highest Linearity and Guaranteed Consistency

Resonator 2.75 in. Center Inlet/ 2.75 in. Center Outlet 5 in. Round x 10 in. Long Body

• Universal. Reversible design.
• Compact size is perfect for applications with limited space
• Alternate muffler/ resonator with notched necks is 401342. Use 1" wide band clamps 18327.

SPE-9541 Coupler Reducer

• Coupler is 3 inches long
• Includes 2 stainless steel worm gear hose clamps
• Made from black PVC

Universal Adjustable Fuel Pressure Regulator

• Adjustable from (20 - 120 PSI)
• CNC-machined from 6061-T6 billet aluminum
• Patent # 6,298,828

Tip 2.5in Inlet/ 3.5in Outlet Single Round Angle-Cut Intercooled

Borla(r) premium-quality exhaust tip features mirror-polished high quality T-304 austenitic stainless steel, precision welds and distinctive styling.

3 AN Bulkhead Nut

• Blue Anodized Aluminum

All American 3-3/8" Speedometer Gauge

• 140 MPH
• Stainless Radial Bezel
• Curved Glass Lens

Autocross Gray 2-1/8" Air Fuel Ratio Gauge

• Full sweep provides increased accuracy
• Small 2 ⅛" hole size
• Push-button calibration

Coupler

• Fits 2.5 to 2.75 inch diameter tubes
• 3 inches in length
• Constructed from long-lasting and durable EPDM rubber

Dual Taper 9.250" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Engine Timing Belt

GAUGE; NITROUS PRESSURE; 2 1/16in.; 1600PSI; DIGITAL STEPPER MOTOR; NV

• Incl. Wiring Harness
• Incl. Mounting Hardware/Instructions
• 12 And 16V Compatible

GAUGE; NITROUS PRESSURE; 2 1/16in.; 1600PSI; DIGITAL STEPPER MOTOR; ULTRA-LITE

• 12 And 16V Compatible
• Incl. Wiring Harness
• Incl. Mounting Hardware/Instructions

GAUGE; OIL PRESSURE; 2 1/16in.; 100PSI; DIGITAL STEPPER MOTOR; ES

• Domed Lens
• Quality Construction
• Black Chrome Bezel

GAUGE; SPEEDO; 5in.; 200MPH; ELEC. PROGRAM W/LCD ODO; ULTRA-LITE

• 12 And 16V Compatible
• Simple Push Button 2 Mile Drive Calibration
• Incl. Mounting Hardware/Instructions

GAUGE; TACH; 5in.; 11K RPM; PEDESTAL; DATALOGGING; ULTIMATE DL PLAYBACK; SILVER

• 12 And 16V Compatible
• Optimize Your Engines Power Band
• User-Programmable Shift Light

High Energy 212/212 Hydraulic Flat Cam K-Kit for International Harvester 304-392

K-KIT - Complete Kit Includes: Camshaft, Lifters, Valve Springs, Retainers, Valve Locks, Valve Stem Seals, Timing Chain Set, Assembly Lube (in flat tappet applications), Decals and Instructions.

Hi-Tech 7.000" Long, .080" Wall, 5/16" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Park Brake Cable

• Attaches to OE Front Cable Section
• Direct Fit, No Cutting Required
• Stainless Steel Cable with a Premium Housing for Long Cable Life

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Straight 7.500" Long, .165" Wall, 7/16" Diameter Pushrod Set

Hi-Tech Straight 7.500" Long, .165" Wall, 7/16" Diameter Pushrod - Set of 16

Straight 9.700" Long, .165" Wall, 7/16" Diameter Pushrod

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.