Performance Parts

10 Degree Tool Steel Retainer Set of 12 All Valves w/ 1.437"-1.500" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

1/0 Ga Battery Cable Kit Black 20ft

• Crimped tin plated brass top post terminals on both cable ends - 1 positive, 1 negative
• Includes copper ring terminals for starter and ground connections
• Comes complete with "P" clip cable mounts and shrink sleeve tubing for a professional finish

1/0 Ga Battery Cable Kit Red 20ft

• Crimped tin plated brass top post terminals on both cable ends - 1 positive, 1 negative
• Includes copper ring terminals for starter and ground connections
• Comes complete with "P" clip cable mounts and shrink sleeve tubing for a professional finish

10 Lightweight Titanium Retainer for 1.625" OD Triple Springs

Upgrading to these 10& deg

10 MICRON REPLACEMENT FILTER ELEMENT 76 SERIES

• high flow, low pressure drop
• Compatible with E85 fuels
• Carbureted or EFI applications

10ORB to 3/4 in Hose Barb Aluminum Fitting, Black

• Mishimoto Lifetime Warranty

10 Steel Retainer for 26120 Beehive Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Steel Retainer for 983 Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Superlock Steel Retainer for 1.250" OD Valve Spring

1.250 spring diameter Steel retainer valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Superlock Steel Retainer for 1.500"-1.550" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Titanium Retainer for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

10 Titanium Retainer for 1.625" OD Triple Springs, +.050" Height over 739

Upgrading to these 10& deg

10 Tool Steel Retainer for All Valves w/ 26056 Springs

These new lightweight 1.185" spring diameter Tool Steel Retainers from COMP Cams have a 10& deg

10 Tool Steel Retainer Set of 16 All Valves w/ 26955, 26956 and 26957 Springs

COMP Cams Lightweight Tool Steel Retainers for #26955, #26956, #26957 springs provide the best of all valve train benefits: light weight, as well as exceptional strength and wear characteristics.

1-1/0Ga Compression Battery Eyelet 1 Pack

• Tin plated copper compression terminals are designed for fast and easy install
• Simply strip the battery cable and apply fitting to cable and screw into battery terminal
• Terminals and compression fittings are cadium-plated for corrosion resistance

1-1/0Ga Compression Battery Terminal 1 Pack

• Tin plated copper compression terminals are designed for fast and easy install
• Simply strip the battery cable and apply fitting to cable and screw into battery terminal
• Terminals and compression fittings are cadium-plated for corrosion resistance

12-1/4in. Standard Threaded Grease Brake Hub Assembly with Installed Bearing Kit

• 16000lbs Axle Capacity
• 8 On 275mm Bolt Pattern
• 17-1/2 in. Wheel Size

12 AN Bulkhead Nut

• Available for Any Plumbing Situation And Many Custom Applications

12 AN Port Plug O-Ring

These parts are included with your purchase of an RHS Race Block but are also available for purchase separately.

1/2in. Convoluted Slit Loom Tubing (1ft. Increments)

• Slit Lengthwise For Easy Application To Wires
• Stronger And Easier To Use Than A Braided Sleeve
• Available In Lengths Of One-Foot Increments

12in. Hybrid Threaded Grease Brake Hub Assembly with Installed Bearing Kit

• 8000lbs Axle Rating
• 12 in. Brake Hub Size
• 5/8 in. Stud Size

12 Male to -6 Male Union Reducer

• Available for Any Plumbing Situation And Many Custom Applications.

1/2" NPT Internal Plug

• Available for Any Plumbing Situation And Many Custom Applications.

14-1/4in. Plastic Zip Wire Ties (100-Pack)

• Zip Tie Mechanism Allows For Tight Bundling
• Tapered End For Easier Insertion Into Lock
• Constructed From Durable White Nylon Plastic

1/4in. Convoluted Slit Loom Tubing (1ft. Increments)

• Slit Lengthwise For Easy Application To Wires
• Stronger And Easier To Use Than A Braided Sleeve
• Available In Lengths Of One-Foot Increments