Engine Sensors

SENSOR; OIL PRESSURE; 0-100PSI; 1/8in. NPT MALE; FOR SHORT SWEEP ELEC.

• Replacement Sender
• Thread Size - 1/8 In. NPTF
• 2 in. Diameter

Livewire TS / X4 Exhaust Gas Temperature Sensor Kit

• Plug And Play Monitoring
• Stainless Steel EGT Probe
• Simple Easy To Install And Set Up

100 PSIg Brass Sensor Kit

• Brass sensors accurate to within 3% of full scale (pressure sensors)
• Connector and pins included
• Analog data scaled across full 100 PSI

Bosch Replacement UEGO Sensor

• Never requires free-air calibration when used with an AEM Controller and connector plug.
• Connector and pins included
• Replacement sensor only

SPE-8711 Vacuum Sensor Adapter Kit

• Attach vacuum lines almost anywhere on intake tube
• Fits all popular vacuum lines and air sensors
• 2 hole saws: 5/8 inch and 7/8 inch

Coolant Temperature Sensor for Pro-Flo and E-Street Systems

Edelbrock part #36012 Coolant Temp Sensor for E-Street and Pro-Flo 3 & Pro-Flo 4 systems.

150 PSIg Stainless Sensor Kit

• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• Connector and pins included
• Analog Data Scaled in Charts

7 BAR Stainless Steel MAP Sensor Kit

• Accurate with 1% margin of error.
• Includes 1/8" NPT to -4 AN adapter.
• Weather resistant connector and pins included

3.5 Bar Stainless MAP Sensor Kit

• Accurate to 1% margin of error.
• Includes 1/8"NPT to -4 AN adapter and barbed fitting.
• Weather resistant connector and pins included

Ethanol Content Flex Fuel Sensor Kit (3/8" Barb)

• Accurate with 3% margin for error.
• Weather resistant connector and pins included
• Analog Data Scaled in Charts

Manifold Absolute Pressure (MAP) Sensor for First Generation Pro-Flo Systems)

The Edelbrock #3587 is a 1-Bar MAP sensor for use with first generation Edelbrock Pro-Flo EFI systems.

EAS Street Diesel Kit

• 1 EAS Starter Kit
• 1 EAS EGT PRobe
• 2 EAS 0-100psi Pressure Sensors

FAE Wideband "Replacement" Sensor

• Replacement for 0300 with 0400 serial number
• Improved durability compared to Bosch 4.9.
• Faster response time.

Oxygen Sensor for Pro-Flo 1 EFI, Bosch 3-Wire, Narrow-Band

The Edelbrock #3591 is a Replacement Narrow-Band Oxygen Sensor For ProFlo1 (#3500 Series) EFI Systems.

2 Bar Manifold Absolute Pressure (MAP) Sensor for Pro-Flo 2 Systems

The Edelbrock #36020 Pro-Tuner EFI Pressure Sensors are intended to be used with Edelbrock's Pro-Tuner EFI system, but may be used with other systems using the supplied connector and wiring.

ATOMIC TBI, FUEL PRESSURE SENSOR -6 ORB

• -6AN O-ring boss threads
• Replacement fuel pressure sensor for Atomic EFI system

EFI Coolant Temp Sensor

Edelbrock part #3589 Pro-Flo EFI replacement coolant temperature sensor is available for Pro-Flo and Pro-Flo XT EFI systems, Brass, Natural, 3/8 in.

Exhaust Back Pressure Plumbing Kit

• Premade -4AN Speed-Flex Hose - 24” Long
• Cushion Clamp & Mounting Hardware - to Mount Sensor
• Use w/ Sensor 554-102 (available separately)

Temperature Sensor

• M12 x 1.5 thread size
• For use with Classic Instruments gauges

2000 PSIg Stainless Sensor Kit

• Accurate to 1% margin of error.
• Includes 1/8" NPT to -4 AN adapter included
• Weather resistant connector and pins included

500 PSIg Stainless Sensor Kit

• Accurate to 1% margin of error.
• Includes 1/8"NPT to -4 AN adapter and barbed fitting.
• Weather resistant connector and pins included

5 BAR Brass MAP Sensor Kit

• Accurate with 3% margin for error.
• Weather resistant connector and pins included
• Analog Data Scaled in Charts

Ford Oil Pressure Bushing Kit

Our brass angled-bushing kits allows for easy installation on most GM or Ford engines.

MAP Sensor Assembly for Atomic TBI

Atomic TBI factory replacement MAP sensor.

Pressure Sensor - 0-75 PSI - With Harness

If you are looking for accurate AFR readings Pre-turbo or just want to know what your back pressure is then the 7767 is for you.