Transmission & Drivetrain

Mod-Twin 225 XT Sprung Street

• "Excellence in Performance", backed by the best one-year warranty in the industry!

Mounting Bracket for Bandit Shifters

• Replacement Part
• Sold Individually
• For Bandit shifters

One Piece 1/4 in Engine Plate Powerglide Front Pump Drive Chevrolet

TCI Front Pump Drives allow you to run without a torque converter where legal and can reduce rotating mass by anywhere from 15 to 30 lbs. compared to running a converter.

Outer Bearing Cone; 12;000-16;000-lb. Axles; 5 Pack

• Compatible With 12000 To 16000 lbs Axles
• Pairs With Bearing Race No.28622
• Compatible With Most Competitor Trailer Axle Hubs

Outer Bearing Cone-12;000 to 16;000 lbs. Axles

• Industry Number 28682
• Pairs With Inner Bearing Cone
• 12000 To 16000 lbs. Weight Capacity

Outer Bearing Cone-5;200 to 6;000-lb. Axles

• Industry Number 15123
• Pairs With Bearing Race PN[15245]
• 1-1/4 in. Shaft Diameter

Pressure Plate Bolts - 3/8-16

• Grade 8 Specifications For Extra Strength
• Kits Complete With Lock Washers (where Needed)
• Black Oxide Plated To Resist Rust And Corrosion

Racing Shift Boot Cover

• SFI 48.1 approved
• Reverse stitching Nomex® thread seam
• Kevlar interior for added protection

Replacement Switch for 618008 Outlaw Shifter Grip w/ Switch

These switches can be used for many things such as nitrous activation, engaging a transbrake or a rollstop.

SENSOR MODULE; GPS SPEEDOMETER INTERFACE; 16FT. CABLE; INCL. GPS ANTENNA

• Fully Sealed And Paintable Magnetic Micro Antenna
• Incl. 6.5 ft. Wiring Harness
• One-Touch Calibration

Shifter Gate Plate - 3-speed Reverse Shift Pattern

• Quality B&M Replacement Part
• Solid Steel Construction
• Easy Installation

Speed Bleeder

• -4AN X 3/8 in. NPT
• Made In The USA
• One Man Operation

T-56 or Magnum Release Bearing Shim Kit

• The 6061 aluminum clutch release bearing shims for T-56 transmission are critical for a hydraulic clutch that properly…
• Available individually in three thicknesses-.059, .119, and .197 inch
• Also available in a convenience Master kit, Holley Part # 319-204 contains (1) shim of each thickness

T56 Release Bearing Shim

• Also available in a convenience Master kit, Holley Part # 319-204 contains (1) shim of each thickness

T56 Release Bearing Shim

• Also available in a convenience Master kit, Holley Part # 319-204 contains (1) shim of each thickness

Trailer Axle Slipper Suspension Kit; 10;000-lb Triple Axle; 48-1/2in. Axle Spaci

• Equalizer Reference EQ-6000GD
• Hangers Sold Separately
• Shackle Bolts/Lock Nuts/Equalizers

Trailer Suspension Hex Bolt; 3/4in. Diam.; 3/4in.-10 Thread; 4-1/2in. Length; 10

• Zinc-Plated Construction For Corrosion Resistance
• 1-Year Limited Warranty
• Ships In Durable Brown Box

Transmission Fitting

• Machined from Steel with Black Finish
• Precision Machined

Transmission Installation Kit - GM Gen V L83 or L84 Adapter

• Allows use of a GM T56 transmission with an L83-L84 engine (with outer pilot bearing position)
• Bellhousing spacer and hydraulic release bearing spacer provide OE specs if using a standard clutch
• Includes bellhousing spacer, hydraulic release bearing spacer, pilot bearing, transmission dowels x 2, transmission to…

Trick Shift Automatic Transmission Fluid - 1 Gallon Bottle

• Provides extended transmission life and firmer shifts
• Signature B&M blue fluid color
• Sold as a 1-gallon bottle

Triple Heavy-Duty Trailer Axle Equalizer-5;000-8;000-lb

• Includes Pre-Installed Bronze Bushings
• Triple Heavy-Duty Axle Configuration
• 5000 - 8000 lbs. Axle Capacity

Twin Disc Sint Iron Race Kit

• "Excellence in Performance", backed by the best one-year warranty in the industry!

Twin Disc XT Street Kit

• "Excellence in Performance", backed by the best one-year warranty in the industry!

Wheel Clamp Ring; 5/8in. Studs

• This Item Ships In A Kraft Box

XT/Race Sprung 4 Pad

• "Excellence in Performance", backed by the best one-year warranty in the industry!