Ignition Systems

MECHANICAL ADVANCE KIT WITH LIMITER FOR ALL FLAME-THROWER BILLET DISTRIBUTORS

• Performance mechanical advance springs.

Pro Mag 20 Amp Generator, CW Rotation, Band Clamp

The increased output of the 20 Amp Pro-Mag was born of racers being racers; always asking for more power.

Pro Stock HEMI Tubes

• Included set of 8 tubes

Space Age Boot Protector Blue 8 Pack

• Retaining ring prevents the sock from coming off once installed
• 6" long, heat treated fiberglass
• Withstands temperatures up to 1200°F

SPE-4238 Wire Separators

• Helps prevent burned plug wires
• ABS construction
• Made from high quality material

Weathertight Connector - 2-Pin - Qty 1

The Weathertight connectors are molded from a special nylon material to withstand temperatures from -40° to +257°F and are indexed to prevent mismatching.

135 Degree Deg Boot Black Sillicone

• Color: Black
• All boot/terminals fit 8-10.4mm
• Pack of 25

180 Degree Boot/Terminal Kit Gray

• Color: Gray
• All boot/terminals fit 8-10.4mm
• Pack of 8

180 Degree Coil Boots

• 180° Coil Boots - Socket Style
• Bulk Pack of 25
• Fit 8-10.4mm wires

180 Degree Dist/Coil Terminal Socket

• 180° Distributor/Coil Terminals - Socket Style
• Bulk Pack of 100
• Fit 8-10.4mm wires

409 Pro Race 10.4mm 100ft Spool Red

• Color: Red
• 100 ft. Coil
• 40-ohm Spiral Wound Ferrite coated core

4-PIN WIRE HARNESS/CAPACITOR FOR ALL FLAME-THROWER HEI DISTRIBUTORS AND GM 8-CYLINDER HEI DISTRIBUTORS

• Premium quality wire harness and capacitor.
• Insure good connection and "static free" operation.

8mm High Energy Rc 100 ft. Spool Blue

• Color: Blue
• 100 ft. Coil
• 40-ohm Spiral Wound Ferrite coated core

8mm Spiro-Pro 100 Ft Spool Pink

• Color: Pink
• 100 ft. Spool
• 350-Ohm per foot resistance Spiral Wound Core

90 Degree Boot/Terminal Kit Blue

• Color: Blue
• All boot/terminals fit 8-10.4mm
• Pack of 8

90 Degree Distributor Boots

• 90° Distributor Boots - Socket Style
• Bulk Pack of 50
• Fit 8-10.4mm wires

Coil Ballast Resistor 0.8 ohm

• Use with older points style ignitions

Electric Cut-Out Replacement Dual Wiring Harness

Doug's Headers DEC6230 Electric Cut-Out Replacement Dual Wiring Harness

EXO Series Protect-A-Boot Ringless 8-Pack 010086

• Improves Heat Dissipation
• No Sewn-In Ring
• 1 In. ID X 6 In. L

High Output Inductive Coil

• Massive Spark Energy, up to 118 mJ
• Up to 41kV Output Voltage, without a CDI
• Can be installed directly to engine

Kill Switch for MSD 12 and 20 Amp Pro Mags

The switch is rated at 15 amps so it can handle the power of the Pro-Mag 12.

Ls/Lt/Vortec Coil/Dist Boot/Terminal Kit 180 Degree Deg

• All boot/terminals fit 8-10.4mm
• Pack of 10

Magnet Sleeve (only) for 1181 Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix 1181 (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Space Age Boot Protector 8in Silver

• Color: Silver
• 6" long, heat treated fiberglass
• Withstands temperatures up to 1200°F

Space Age Boot Protector Orange 8 Pack

• Color: Orange
• 6" long, heat treated fiberglass
• Withstands temperatures up to 1200°F