Distributors

Max-Fire Distributor Cap Rotor

Edelbrock part #22731 Small Diameter Low Profile Distributor Cap & Retainer for Max-Fire Distributors.

Magnetic Pickup for all MSD Billet Distributors

• Replacement maintenance-free magnetic pickup
• Found in all Pro-Billet Distributors

Low Resistance Bushing for HEI Distributor

The carbon rotor button in a stock HEI distributor cap has very high resistance.

CLOCKWISE VACUUM LOCKOUT FOR ALL FLAME-THROWER HEI DISTRIBUTORS AND GM 8-CYLINDER HEI DISTRIBUTORS

• For closed course competition use only, not to be used on emission controlled vehicles.
• These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.
• Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.

Sync Pickup Kit - Cam - Universal

This Universal Cam Sync pickup Kit is supplied with a non-magnetic pickup and a magnet that you install to any part that operates at camshaft speed.

Distributor Cap Bolt Down Kit, Ford Cap

Under Racing conditions and severe vibrations the cap can move with the spring clips, but with these bolt down style clips this will prevent any movement!

Distributor Reluctor

Replacement reluctor for MSD Distributors.

Hall-Effect Pickup with LED, 1/2x20 Threaded

Available separately and can replace the non-magnetic pickup of the PN 2345 and PN 2340 Distributor.

Module Bypass Cable, GM HEI

Adapts MSD Distributor to harness on GM Ignition, MSD 6M-2 PN 6460, MSD 6-Offroad PN 6470 or MSD 8 Ignition PNs 7800, 7802.

to Ford Duraspark Adapter Harness

• Ford Duraspark connector
• Female AMP Pin connetor

Pro Mag 20 Amp Generator, CW Rotation, Band Clamp

The increased output of the 20 Amp Pro-Mag was born of racers being racers; always asking for more power.

Magnet Sleeve (only) for 1281 Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix 1281 (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

4-PIN WIRE HARNESS/CAPACITOR FOR ALL FLAME-THROWER HEI DISTRIBUTORS AND GM 8-CYLINDER HEI DISTRIBUTORS

• Premium quality wire harness and capacitor.
• Insure good connection and "static free" operation.

MECHANICAL ADVANCE KIT WITH LIMITER FOR ALL FLAME-THROWER BILLET DISTRIBUTORS

• Performance mechanical advance springs.

Distributor Reluctor

To obtain maximum performance, many engine builders actually modify the distributor's reluctor to obtain different timing for each specific cylinder.

O-Ring Kit, Billet Chevy Distributor

O-ring kit fits all MSD Chevrolet Distributors.

Replacement Rotor #22734 for Pro-Flo 4 EFI distributor

• Direct-fit press-on replacement for worn or broken rotors
• Designed specifically for Pro-Flo 4 EFI distributors
• Made in the USA

Wiring Harness - 3-Pin

3-pin Ready-to-Run Distributor replacement harness, stock length.

Hall Pickup w/LED Ind., Cam Sync Plugs

• Comes with mating connector
• LED Operation
• ½-20 UNF Tread x 1.25L

Magnet Sleeve (replacement) for PerTronix Industrial Electronic Distributor

• Replacement magnet sleeve for PerTronix Industrial Distributors: D41-01A, D41-05A, D41-09B, D41-10B, D41-11B, D41-19A…

Wire Harness

3-wire for ignition box.

Pickup for MSD GM HEI Distributors

• Replacement Magnetic Pick-Up for OE GM HEI Distributor or PN 8365

Pro Mag Replacement Cap Ring fits PN's 8130, 8140

Known simply as "the black ring" this is a replacement spacer that comes on full-size, band clamp Pro-Mags.

Magnet Sleeve (only) for 1941 Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix 1941 (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.