Fuel Systems

14-1/4" - 15-1/4" Deep Tank (10-180 Ohm)

Quality, Service and Value are not new to us.

15-1/4" - 16-1/4" Deep Tank (10-180 Ohm)

Quality, Service and Value are not new to us.

16AN Straight Flare To 3/4" NPT Adapter Fitting With Black Finish

• 6061-T6 Aluminum
• Precision Machined

17-1/4" - 18-1/4" Deep Tank (1975-2010 Ohm)

Quality, Service and Value are not new to us.

18-1/4" - 19-1/4" Deep Tank (0-30 Ohm)

Quality, Service and Value are not new to us.

18-1/4" - 19-1/4" Deep Tank (0-90 Ohm)

Quality, Service and Value are not new to us.

18-1/4" - 19-1/4" Deep Tank (1975-2010 Ohm)

Quality, Service and Value are not new to us.

19 Lb/Hr Pico Fuel Injector (Qty 1)

The Edelbrock #3574 is a 19 pound-per-hour Fuel Injector for the ProFlo TBI to MPFI Conversion Systems.

20-1/4" - 21-1/4" Deep Tank (10-180 Ohm)

Quality, Service and Value are not new to us.

22" Braided Fuel Line Kit

This Edelbrock Stainless Steel Braided Fuel Kit #8122 connects mechanical fuel pumps with 1/2" NPT outlets to Edelbrock Fuel Pressure Regulator Kits.

27" Braided Fuel Line Kit

This Edelbrock #8127 Stainless Steel Braided Fuel Kit connects mechanical fuel pumps with 1/2" NPT outlets to Edelbrock Fuel Pressure Regulator Kits.

3 AN Stainless Steel Tube Nut

• Available for Any Plumbing Situation And Many Custom Applications.

3" X 8" HydraMat®, Rectangle Center Outlet

• The outlet has 6 positions to orient the HydraMat for best location in the fuel cell
• Eliminates the need for specialty reservoirs, sumps and pick up pumps saving cost and greatly reducing complexity
• Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump

400LPH E85-COMPATIBLE HI FLOW IN-TANK FUEL PUMP - DOUBLE BARB

• Maintains very high flow even at boosted fuel pressures; 330+ LPH (70 PSI, 13.5V) (30 psi boost)
• Highly efficient - pumps draw only 12A @ 40 PSI and 15A @ 70 PSI
• Both models feature a 9mm outlet barb with an 11mm inlet in-line with the outlet

4150/4160 Flange Gasket

4150/4160 Flange Gasket - open 4 bbl. design - standard black gasket

4 AN Stainless Steel Tube Nut

• Available for Any Plumbing Situation And Many Custom Applications.

4 bbl. Road Race Float Kit

4 bbl.

50cc Accelerator Pump Conversion Kit

• Genuine Holley Quality Parts

50cc Dominator Pump Lever

• Genuine Holley Quality Parts

60 Lb/Hr Fuel Injector (Qty 8)

The Edelbrock #15903 is a 60 pound-per-hour Fuel Injector for the E-Street TBI, ProFlo EFI, and Edelbrock supercharger systems.

60 Lb/Hr Fuel Injector (Qty 8)

The Edelbrock #3686 injectors have standard Bosch style O-ring to O-ring dimensions and are high impedance 61 lb/hr at 43.5 psi.

6AN ORB 40-70 PSI FUEL PULSE DAMPER

• Compatible with any fuel -- full anodized billet aluminum construction with stainless steel springs and fluorosilicone…
• Fittings included for damper/regulator’s and direct mount dampers
• 1/8" NPT port on body of damper/regulators and in-line dampers for easy installation of mechanical pressure gauge or…

8 AN Stainless Steel Tube Nut

• Available for Any Plumbing Situation And Many Custom Applications.

94â„¢ Carburetor Straight Throttle Linkage Kit for Dual Carb Set-up

The Edelbrock part #1032 Non-Progressive Linkage Kits are designed to facilitate the synchronous operation of multiple two-barrel carburetors.

94â„¢ Series Carburetor Main Jet - .048" (Qty 2)

The Edelbrock 94 #1157 Carburetor Jets .048" Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94's and its later variations.