Fuel Systems

Fuel Hose Kit

• Billet Construction
• Flows Up To 130 Gallons Per Hour
• Supplied w/.1250 in. NPT Female Port

Fuel Hose Kit

• Billet Construction
• Flows Up To 130 Gallons Per Hour
• Include 0.125 in. Pipe Plug

Fuel Hose Kit

• Billet Construction
• Flows Up To 130 Gallons Per Hour
• Supplied w/.1250 in. NPT Female Port

Fuel Line Kit

• Centerline to centerline = 9.5

Fuel Line Kit with Gauge & Fittings - Chrome

• Features a 1-1/2" diameter fuel pressure gauge
• Gauge reads in 1/2 lb. increments from 0 – 15 lbs
• Inverted flare female inlet thread size 5/8" - 18

Fuel Line Kit with Gauge & Fittings - Chrome

• Chrome Plated Fuel Line
• Comes With 0 To 15 psi fuel pressure Gauge
• Hose Barb Fits 3/8" Fuel Hose

Fuel Psi Adapter

• 6061-T6 Aluminum
• Precision Machined

Fuel Psi Adapter

• 6061-T6 Aluminum
• Precision Machined

Fuel Pump

• Universal design fits most applications
• Eliminates vapor lock and flooding
• For use with 5/16 inch fuel lines

Gas Jet Extension

Gas Main Jet Extension (1/4") - Sold in pairs - Comes with replacement non-stick fuel bowl gasket

Gasket Set for Performer and Thunder Series Carbs

The Edelbrock #1472 Gasket set is a complete set of gaskets for the EPS, AVS and AVS II series of Edelbrock carburetors.

Hard Core Gray Aluminum Center Hung "V" Bowl Kit - Primary

• Clear, glass sight window for easy, safe fuel level adjustments
• Aluminum construction with Hard Core Gray (black anodized) finish
• Weighs approximately .60lb less than its zinc counterpart

Heat Insulator Gaskets for Edelbrock Dual-Quad Manifolds - 0.125" Thick (Qty 2)

The Edelbrock Square-bore Dual Quad Heat Insulator Gaskets #9267 are designed to prevent percolation on Thunder Series and Edelbrock Performer Series Carburetors exposed to extreme under hood temperatures.

High Flow In-Tank Fuel Pump

• Maintains very high flow even at boosted fuel pressures; 330+ LPH (70 PSI, 13.5V) (30 psi boost)
• Highly efficient - pumps draw only 12A @ 40 PSI and 15A @ 70 PSI
• Both models feature a 9mm outlet barb with an 11mm inlet in-line with the outlet

High Flow Needles and Seats - .110"" (Qty 2)

The Edelbrock #1466 High Flow Needle and Seats includes a pair of needles and .110" seats.

Hose Clamp

• Rubber Covered Hose Loop
• Spring Steel Tab Mount

Idle Mixture Screw Set for all Edelbrock Square-Bore Carburetors (Qty 2)

The Edelbrock Idle Mixture Screw Set #1496 includes a pair of idle mixture screws and springs for all Edelbrock square bore carburetors.

IN-LINE FUEL PULSE DAMPER

• Fittings included for damper/regulator’s and direct mount dampers
• Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
• Assembled and tested in the USA

Intake Manifold Choke Kit

• Choke Block-Off Pad

Needle and Seat Assembly - .145" for Q-Jet Carbs

The Edelbrock Q-Jet Needle and Seat #1980 has a High-capacity/high-flow .145" diameter seat assembly.

Non-Stick Power Valve Gasket

Non-Stick Power Valve Gasket - sold individually

O.E. Fuel Line EFI Quick Connect -6 to 3/8" - Black

• Fits Most Vehicles w/ 3/8" Fuel Rail - SAE Standard Connection

Performance Carburetor Base Gasket

• Can Be Trimmed If Necessary
• Cellulose/Nitrile Performance Series Gasket Material
• 1/16" Thick

Performance Carburetor Base Gasket - 4-Hole - Skin Packaged

• 1/16" Thick
• Precision Die Cut For Excellent Seal And Fit
• Can Be Trimmed If Necessary

Performer Series Calibration Kit for #1405 Carburetors

Edelbrock Performer EPS 1405 carburetor calibration kit