Fuel Systems

Chrome Steel Fuel Line With 3/8" Barbed End Inlet Without Fuel Filter

This Edelbrock #8126 Chrome Steel Fuel Inlet for Edelbrock carburetors provide a clean and custom plumbing solution.

High Flow In-Tank Fuel Pump

• In-tank design
• Each pump individually tested
• For gasoline vehicles

Carburetor Throttle Ball Assortment

The Edelbrock #12413 Carburetor Throttle Ball Assortment comes with 4 different carburetor ball studs, supplied with hardware.

Universal Carburetor Choke Cable with Polished Knob

This universal push/pull cable is intended for use with Edelbrock 2 and 4 barrel carburetors equipped with a manual choke.

Universal Micro Electric Fuel Pump - 30 GPH / 114 LPH (Gasoline/E85)

Edelbrock part #17303 fuel pump is a gravity fed type pump with a simple 2 wire design.

Universal Micro Electric Fuel Pump - 38 GPH / 144 LPH (Gasoline/E85)

Edelbrock part #17301 fuel pump is a gravity fed type pump with a simple 2 wire design.

Replacement Filter Element for #17301 and #17303 (40 micron)

Edelbrock part #17311 fuel filter is a replacement filter element for #17301 and #17303 Universal Micro Electric Fuel Pumps.

3" Aluminum Street Fuel Filter in Black Finish

Edelbrock part #8157 Aluminum Street Fuel Filter feature a sintered-bronze 40-micron element that can be cleaned or replaced.

Chromed Steel Fuel Line & Filter Kit Fo Eps Carbs

This Edelbrock #8134 Chrome Steel Fuel Inlet for Edelbrock carburetors provide a clean and custom plumbing solution.

Metering Block/ Fuel Bowl Gasket Pack

• Blue Non-Stick
• 2 Of PN 108-89
• 2 of PN 108-83

AVS2 Series Carburetor Calibration Kit

The AVS2 Series Carburetor Calibration Kit #1948 is for tuners looking to custom-tune the performance of their #1905 or #1906 carburetor.

Heat Insulator Gasket for Open 4150 Square-Bore - 0.320" Thick

The Edelbrock Square-bore Heat Insulator Gasket #9266 is designed to prevent percolation on Edelbrock Performer Series carburetors exposed to extreme under hood temperatures.

Hose, 30', 20946

• 1/4 In Diameter
• D.O.T. Approved Black Synflex Air Line
• 30 ft. Increment

Heat Insulator Gasket for Divided 4150 Square-Bore - 0.320" Thick

The Edelbrock Square-bore Heat Insulator Gasket #9266 is designed to prevent percolation on Edelbrock Performer Series Carburetors exposed to extreme under hood temperatures.

Carb Adapter for 4150 Square-Bore to Stock Quadrajet & Thermo-Quad Spread-Bore

The Edelbrock Square-bore Carb to Spread-bore Manifold Adapter #2696 is designed to allow installation of the Edelbrock Performer Series carburetor on vehicles with the OEM (original equipment) spread-bore intake manifold (typically GM vehicles that were originally equipped with the Rochester Quadrajet carburetor).

Bull Nosed Carburetor Stud Kit in Black Oxide Finish

• Carburetor Stud Kit #8056 Black Oxide Finish 5/16-18 x 1 1/2in
• Edelbrock Carb Mounting Studs Washers/Nuts, Set Of 4.

AVS2 800 CFM #1913 Carburetor, Elec. Choke for High-Horsepower Engines

Edelbrock's Annular Flow Booster technology brings superior fuel atomization to all high-horsepower small- and big-block engines with the AVS2 800 CFM Electric Choke Carburetor #1913 that is specially calibrated to make power.

Square-Bore to Spread-Bore Adapter Plate .100" thick for Edelbrock Manifolds

The Edelbrock Square-Bore to Spread-Bore Adapter #2732 adapts square-bore carbs to spread-bore carb pad on Edelbrock intakes.

AVS2 Series Carburetor Calibration Kit

The AVS2 Series Carburetor Calibration Kit #1949 is for tuners looking to custom-tune the performance of their AVS2 Series #1912 (manual choke) or #1913 (electric choke) 800 CFM carburetor.

High Flow Inline Fuel Pump

• Designed for high output naturally aspirated and forced induction EFI vehicles
• Installs externally or in-tank
• Each pump individually tested to flow minimum of 400LPH (100gph) @ 40 PSI

Step-Up Spring Assortment Includes 5 Different Springs (Qty 2)

The Edelbrock #1464 Step-Up Spring Assortment includes 3" Hg (blue), 4" Hg (yellow), 5" Hg (orange), 7" Hg (pink) and 8" Hg (plain) Springs.

3" Aluminum Street Fuel Filter in Chrome Finish

Edelbrock part #8136 Aluminum Street Fuel Filter feature a sintered-bronze 40-micron element that can be cleaned or replaced.

Uni-Syn "A" Carburetor Balancing Instrument for 1 and 2-bbl with Round Top

Edelbrock UNI-SYN "A" Carburetor Balancing instrument

Carburetor Rebuild & Maintenance Kit for All Edelbrock Square-Bore Carbs

The Edelbrock 1477 rebuild kit is a complete kit that is needed to rebuild any Edelbrock square-bore carburetor.

Performance Carb Base Gasket - Open Center,Bulk Packaged w/UPC Label

• 1/16" Thick
• Precision Die Cut For Excellent Seal And Fit
• Can Be Trimmed If Necessary