Fuel Tanks & Senders

Hardware Mounting KIT-5 Screws

Hardware Mounting Kit 5 Screws

Rollover Valve for EFI In Tank Retrofit Modules

• Genuine Holley Quality Parts

11" x 11" HydraMat®, Cross

• Works with Alcohol, Ethanol, Methanol, and E-85 fuels
• Works with 2-cycle oil blends as high as 20:1
• Not for use with diesel fuels

14-1/4" - 15-1/4" Deep Tank (10-180 Ohm)

Quality, Service and Value are not new to us.

15-1/4" - 16-1/4" Deep Tank (10-180 Ohm)

Quality, Service and Value are not new to us.

17-1/4" - 18-1/4" Deep Tank (1975-2010 Ohm)

Quality, Service and Value are not new to us.

18-1/4" - 19-1/4" Deep Tank (0-30 Ohm)

Quality, Service and Value are not new to us.

18-1/4" - 19-1/4" Deep Tank (0-90 Ohm)

Quality, Service and Value are not new to us.

18-1/4" - 19-1/4" Deep Tank (1975-2010 Ohm)

Quality, Service and Value are not new to us.

20-1/4" - 21-1/4" Deep Tank (10-180 Ohm)

Quality, Service and Value are not new to us.

3" X 8" HydraMat®, Rectangle Center Outlet

• The outlet has 6 positions to orient the HydraMat for best location in the fuel cell
• Eliminates the need for specialty reservoirs, sumps and pick up pumps saving cost and greatly reducing complexity
• Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump

Fuel Level Sender

• Allow at least 1/4" clearance from end of tube to bottom of tank
• 240 ohms empty, 33 ohms full

Fuel Level Sender

Quality, Service and Value are not new to us.

Fuel Level Sender

Quality, Service and Value are not new to us.

Fuel Level Sender

• 240 ohms empty, 33 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

Fuel Level Sender

• 240 ohms empty, 33 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

Fuel Level Sender

• 0 ohms empty, 30 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

Fuel Level Sender

• 0 ohms empty, 90 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

Fuel Level Sender

• 0 ohms empty, 90 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

Fuel Level Sender

• Allow at least 1/4" clearance from end of tube to bottom of tank
• 0 ohms empty, 90 ohms full

Fuel Level Sender

• Allow at least 1/4" clearance from end of tube to bottom of tank
• 0 ohms empty, 90 ohms full

Fuel Level Sender

• Allow at least 1/4" clearance from end of tube to bottom of tank
• 0 ohms empty, 90 ohms full

Fuel Level Sender

• 75 ohms empty, 10 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

Fuel Level Sender

• Allow at least 1/4" clearance from end of tube to bottom of tank
• 75 ohms empty, 10 ohms full

Fuel Level Sender

• Allow at least 1/4" clearance from end of tube to bottom of tank
• 75 ohms empty, 10 ohms full