Engine Components

Hardened Steel Set of 16 - 7 Degree, 11/32", Single Groove Street Locks

Includes 16 Pairs of hardened Steel Street Locks: 1 Groove, 7& deg

Hardened Steel Set of 12 - 7 Degree, 11/32", Single Groove Street Locks

Includes 12 Pairs of hardened Steel Street Locks: 1 Groove, 7& deg

Hardened Steel Set of 12 - 7 Degree, 3/8", Single Groove Street Locks

Includes 12 Pairs of hardened Steel Street Locks: 1 Groove, 7& deg

Hardened Steel Set of 12 - 7 Degree, 5/16", Single Groove Street Locks

Hardened Steel 7& deg

Hardened Steel Set of 16 - 7 Degree, 3/8", Single Groove Street Locks

Includes 16 Pairs of hardened Steel Street Locks: 1 Groove, 7& deg

Hardened Steel Set of 16 - 7 Degree, 5/16", Single Groove Street Locks

Includes 16 Pairs of hardened Steel Street Locks: 1 Groove, 7& deg

Hardened Steel Set of 8 - 7 Degree, 11/32", Single Groove Street Locks

Includes 8 Pairs of hardened Steel Street Locks: 1 Groove, 7& deg

Machined Steel Set 100 - 7 Degree, 5/16", Single Groove Race Locks

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case.

Machined Steel Set of 100 - 7 Degree, 11/32", Single Groove Race Locks

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case.

Machined Steel Set of 100 - 7 Degree, 3/8", Single Groove Race Locks

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case.

Machined Steel Set of 100 - 7 Degree, 5mm, Single Groove Race Locks

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case.

Machined Steel Set of 12 - 7 Degree, 11/32", Single Groove Race Locks

Includes 12 Pairs of Machined Steel Race Locks: 1 Groove, 7& deg

Machined Steel Set of 12 - 7 Degree, 8mm, Single Groove Race Locks

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case.

Machined Steel Set of 16 - 7 Degree, 11/32", Single Groove Race Locks

Includes 16 Pairs of Machined Steel Race Locks: 1 Groove, 7& deg

Machined Steel Set of 16 - 7 Degree, 3/8", Single Groove Race Locks

These single groove Machined Steel Street Locks with 7& deg

Machined Steel Set of 16 - 7 Degree, 5/16", Single Groove Race Locks

Includes 16 Pairs of Machined Steel Race Locks: 1 Groove, 7& deg

Set of 100 - 10 Degree, 11/32", Single Groove Locks w/ Lash Cap Recess

Ideal for use in race applications, our wider 10 degree angle locks better distribute increasing spring loads over the retainer more than typicaly 7 degree locks.

Set of 100 - 10 Degree 11/32 Single Groove Locks w/ Lash Cap Recess -.050" Height

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case.

Set of 100 - 10 Degree, 11/32", Single Groove Locks w/o Lash Cap Recess

Ideal for use in race applications, our wider 10 degree angle locks better distribute increasing spring loads over the retainer more than typicaly 7 degree locks.

Set of 100 - 10 Degree 11/32 Single Groove Locks w/o Lash Cap Recess +.050 Height

• uper-Tough - 10 Degree Super Locks greatly reduce the chance of "pull-through" failure in high load applications.…
• COMP Super Locks are machined from fatigue resistant alloy material.

Set of 100 - 10 Degree, .308"/5/16", Single Groove Locks w/ Lash Cap Recess

Ideal for use in race applications, our wider 10 degree angle locks better distribute increasing spring loads over the retainer more than typicaly 7 degree locks.

Set of 100 - 10 Degree, .310", Single Groove Locks w/ Lash Cap Recess

Ideal for use in race applications, our wider 10 degree angle locks better distribute increasing spring loads over the retainer more than typicaly 7 degree locks.

Set of 100 - 10 Degree, .310", Single Groove Locks w/o Lash Cap Recess

Ideal for use in race applications, our wider 10 degree angle locks better distribute increasing spring loads over the retainer more than typicaly 7 degree locks.

Set of 100 - 10 Degree, 3/8", Single Groove Locks w/ Lash Cap Recess

Ideal for use in race applications, our wider 10 degree angle locks better distribute increasing spring loads over the retainer more than typicaly 7 degree locks.

Set of 100 - 10 Degree, 3/8" Single Groove Locks w/ Lash Cap Recess -.050" Height

Ideal for use in race applications, our wider 10 degree angle locks better distribute increasing spring loads over the retainer more than typicaly 7 degree locks.

Set of 100 - 10 Degree 3/8" Single Groove Locks w/o Lash Cap Recess +.050" Height

• Super-Tough - 10 Degree Super Locks greatly reduce the chance of "pull-through" failure in high load applications.…
• COMP Super Locks are machined from fatigue resistant alloy material.

Set of 12 - 10 Degree, 11/32", Single Groove Locks w/ Lash Cap Recess

These Steel Super Locks featuring a lash cap recess, 10& deg

Set of 12 - 10 Degree 11/32 Single Groove Locks w/ Lash Cap Recess -.050" Height

10& deg

Set of 12 - 10 Degree, 11/32", Single Groove Locks w/o Lash Cap Recess

10& deg

Set of 12 - 10 Degree 11/32 Single Groove Locks w/o Lash Cap Recess +.050 Height

These Steel Super Locks with +.050 install height feature a 10& deg

Set of 12 - 10 Degree, .308"/5/16", Single Groove Locks w/ Lash Cap Recess

These Steel Super Locks featuring a lash cap recess, 10& deg

Set of 12 - 10 Degree, 3/8", Single Groove Locks w/ Lash Cap Recess

10& deg

Set of 12 - 10 Degree, 3/8" Single Groove Locks w/ Lash Cap Recess -.050" Height

10& deg

Set of 16 - 10 Degree, 11/32", Single Groove Locks w/ Lash Cap Recess

These Steel Super Locks featuring a lash cap recess, 10& deg

Set of 16 - 10 Degree 11/32 Single Groove Locks w/ Lash Cap Recess -.050" Height

These Steel Super Locks with .050 install height feature a lash cap recess, 10& deg

Set of 16 - 10 Degree, 11/32", Single Groove Locks w/o Lash Cap Recess

These Steel Super Locks without a lash cap recess features a 10& deg

Set of 16 - 10 Degree 11/32 Single Groove Locks w/o Lash Cap Recess +.050 Height

These Steel Super Locks with +.050 install height feature a 10& deg

Set of 16 - 10 Degree, .308"/5/16", Single Groove Locks w/ Lash Cap Recess

These Steel Super Locks featuring a lash cap recess, 10& deg

Set of 16 - 10 Degree, .310", Single Groove Locks w/ Lash Cap Recess

These Steel Super Locks featuring a lash cap recess, 10& deg

Set of 16 - 10 Degree, .310", Single Groove Locks w/o Lash Cap Recess

These Steel Super Locks without a lash cap recess feature a 10& deg

Set of 16 - 10 Degree, .310", Single Groove Locks w/o Lash Cap Recess

Ideal for use in race applications, our wider 10 degree angle locks better distribute increasing spring loads over the retainer more than typicaly 7 degree locks.

Set of 16 - 10 Degree, 3/8", Single Groove Locks w/ Lash Cap Recess

These Steel Super Locks with lash cap recess feature a 10& deg

Set of 16 - 10 Degree, 3/8" Single Groove Locks w/ Lash Cap Recess -.050" Height

These Steel Super Locks with .050 install height feature a lash cap recess, 10& deg

Set of 16 - 10 Degree 3/8" Single Groove Locks w/o Lash Cap Recess +.050" Height

These Steel Super Locks with +.050 install height feature a 10& deg

Set of 8 - 10 Degree, 11/32", Single Groove Locks w/ Lash Cap Recess

These Steel Super Locks featuring a lash cap recess, 10& deg

Set of 8 - 10 Degree 11/32 Single Groove Locks w/o Lash Cap Recess +.050" Height

10& deg

SUPER VALVE LOCKS, +.050 11/32

COMP Cams Super valve locks are wider-angled 10 degree locks.

SUPER VALVE LOCKS, 3/8"

3/8 Super Lock

SUPER VALVE LOCKS, 3/8"

3/8 Super Lock-1

SUPER VALVE LOCKS, 5/16" W/REC

5/16 Super Lock with Recess

Titanium Set of 12 - 10 Degree, 11/32", Single Groove Locks w/ Lash Cap Recess

These Titanium Super Locks with lash cap recess feature a 10& deg

Titanium Set of 12 - 10 Degree, 5/16", Single Groove Locks w/ Lash Cap Recess

These Titanium Super Locks with lash cap recess feature a 10& deg

Titanium Set of 16 - 10 Degree, 11/32", Single Groove Locks w/ Lash Cap Recess

These Titanium Super Locks with lash cap recess feature a 10& deg

Titanium Set of 16 - 10 Degree, 5/16", Single Groove Locks w/ Lash Cap Recess

These Titanium Super Locks with lash cap recess feature a 10& deg

Titanium Set of 16 - 8 Degree, 11/32", Single Groove Race Locks

Titanium Super 7 Valve Locks with 8& deg

Titanium Set of 8 - 10 Degree, 11/32", Single Groove Locks w/ Lash Cap Recess

These Titanium Super Locks with lash cap recess feature a 10& deg

Titanium Set of 8 - 10 Degree, 5/16", Single Groove Locks w/ Lash Cap Recess

These Titanium Super Locks with lash cap recess feature a 10& deg