Engine Components

7 Degree Steel Retainer Set 100 for 3/8" Valves w/ 1.500"-1.550" Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

7 Titanium Retainer for 11/32" Valve Stem w/ 26915/26918 Beehive Spring

Upgrading to these 7& deg

8 AN Plug

• Available for Any Plumbing Situation And Many Custom Applications

Bolt for 549102 Thrust Plate

When it comes to street performance and/or competitive racing, the horsepower capability of cylinder heads can be limited if not used with the right parts.

BOLT, FOR 6100 FRONT BELT GUAR

Front Belt Guard Bolt for #6100 Magnum Belt Drive System

BOLT KIT, FOR 6100 BELT DRIVE

6100 Belt Drive Bolt Kit

BRACKET; "A", 12" BLANK

• 12 inches long
• Made from high-strength and temperature resistant 6063 aluminum alloy
• Slotted end can be secured with a bolt

BRACKET Spacer Kit LT4 Accessory Drive Systems

• Genuine Holley Quality Parts

CAM BOLTS, 5/16 X 7/8 SHCS

COMP Cams' part number 6500CB-1, Cam Bolt for 6500 Belt Drive.

CAM & LIFTER KIT, OL XR262HR-1

CL-KIT - Cam and Lifter Kit Includes: Camshaft, Lifters, Assembly Lube, Decals and Instructions.

Camshaft Bolt for Ford 352-427

Designed to prevent breakage.

Check Valve

• Unaffected By Most Lubes

Check Valve

• Unaffected By Most Lubes

CONICAL SPRING, 1.445/1.660 OD, 1.900 IH, .750 LIFT, 400 LBS/IN, SUPERFINISH, HR

CONICAL SPRING, .945/1.160 OD, 1.600 IH, .585 LIFT, 200 LBS/IN, SUPERFINISH, HR

Cork Gasket Material - 1/8 x 12 x 36 Inch

• Ideal for use to make valve cover gaskets, and intake manifold end seals
• 1/8" x 12" x 36"
• Use w/ Oil

CYLINDER HEAD

• Bare Head
• For Big Block Chevy
• High Isostatic Pressing Design

DUAL SPRING W/ DAMPER, 1.560 OD, 1.900 IH, .740 LIFT, 400 LBS/IN, HR

Dual Taper 7.400" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 7.650" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 7.800" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 7.900" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 8.900" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.150" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Valve Spring 1.560 OD, 1.900 IH, .740 Lift, 550 LBS/IN, Superfinsh

COMP Cams' new 26943 dual valve springs are a product of innovative design and superior craftsmanship.