Engine Components

Magnum 9.750" Long, .080" Wall, 3/8" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum Polylock for 3/8" Rocker Stud

3/8" Magnum Poly Lock

Magnum Polylock for 7/16" Rocker Stud

7/16" Magnum Poly Lock-1

Magnum Polylock Set for 3/8" Rocker Stud

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Magnum Polylock Set for 7/16" Rocker Stud

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Magnum Rocker Stud w/ 7/16" Base Thread and 7/16" Rocker Thread

7/16" Magnum Stud

MANIFOLD-BRACKET KIT, LT4 DRY-BLACK

• Genuine Holley Quality Parts

Mid LSA Accessory Drive Bracket Kit - Alternator - Black

• Compatible with all Holley Alternators
• Compatible with Holley P/N 20-160 compact SD7 A/C kit
• Compatible with LSA and 2010-15 LS Camaro water pumps

Race Extreme 1.683" OD Triple Springs; 2.100" Installed Height; 16 Springs

Elite Race Triple Valve Springs from COMP Cams have an .800" to .900" maximum lift and outside diameter of 1.680".

Replacement Hardware Kit

• Replacement Hardware for Gen III Hemi Mid-Mount Accessory Drive System

Replacement Hardware kit for 20-159

• Genuine Holley Quality Parts

Replacement Nut and Screw for 1071, 1073, 1074 and 1076 Rockers

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Replacement Thrust Button for 210 and 212 Timing Covers and 5100 Belt Drive

Riding between the front of the timing Gear and the back of the timing cover.

Replacement Timing Chain for 2120, 2131, 2138 and 2135 Timing Sets

Replacement Timing Chain for 2120, 2131, 2135 and 2138 Magnum Timing Sets

Replacement Timing Chain for 2121, 2108 and 2113 Timing Sets

Heavy-duty, heat-treated true double Roller timing chain.

Replacement Timing Chain for 3149KT Timing Set

Pre-stretched, heat-treated double Roller chain with heavy-duty large pin design.

Replacement Timing Chain for 3200 and 3202 Timing Set

Exceed all original equipment timing chain Specifications.

Replacement Timing Chain for 3203 Timing Set

Exceed all original equipment timing chain Specifications.

Replacement Timing Chain for 3205 Timing Set

Exceed all original equipment timing chain Specifications.

Replacement Timing Chain for 3208 Timing Set

Exceed all original equipment timing chain Specifications.

Replacement Timing Chain for 3212 Timing Set

Exceed all original equipment timing chain Specifications.

Replacement Timing Chain for 3217 Timing Set

Exceed all original equipment timing chain Specifications.

Replacement Timing Chain for 3222 Timing Set

Exceed all original equipment timing chain Specifications.

Replacement Timing Chain for 3223 Timing Set

Exceed all original equipment timing chain Specifications.

Replacement Timing Chain for 3226 Timing Set

Exceed all original equipment timing chain Specifications.

Replacement Timing Chain for 3230 Timing Set

Exceed all original equipment timing chain Specifications.

Retard Module Kit, 1,2,3,4,5 Degrees

MSD Retard Module Kits give you a full selec­tion of retard modules to be used with your Tim­ing Controls.

Retard Module Selector, 0°-11°

The Retard Module Selectors allow you to select between 12 retard amounts with the turn of a dial.

ROCKERS, CS 1.5 7/16" ULTRA PR

The Ultra Pro Magnumâ„¢ XD Rocker Arms are engineered from durable 8650 Steel that outlasts and outperforms other inferior knock-off and import Rockers.

Set of 12 Metal Viton Valve Seals for .500" Guide Size, 3/8 Valve Stem

3/8 x .500" Metal Body Viton Valve Seal

Set of 12 PTFE Valve Seals for .530" Guide Size, 11/32" Valve Stem

COMP Cams offers a complete line of valve stem Seals, from the stock GM "O-Ring" to the positive-stop PTFE Seal.

Set of 16 - 10 Degree 11/32 Single Groove Locks w/o Lash Cap Recess +.050 Height

These Steel Super Locks with +.050 install height feature a 10& deg

Set of 16 Metal Body Viton Valve Seals for .530" Guide Size, 11/32" Valve Stem

11/32" Viton Metal Body Seal for use with Triple Spring with a Total OD of .575"

Set of 16 PTFE Valve Seals for .500" Guide Size, 5/16" Valve Stem

< ul>< li> Fits: 5/16" Valve Stems - .500" Guides (.600" Seal Diameter)</li>< li> Valves Seals keep unwanted oil from entering the combustion chamber through clearance in the valve guides</li>< li> Smaller diameter than COMP Umbrella Seals to allow use with double springs</li></ul>

Set of 8 Hardened Lash Caps w/ 5/16" Valve Stem, .230" Head Height

Includes 8 Hardened Lash Caps: 5/16 Stem Size, .230" Head Height, .080" Thickness.

SINGLE SPRING W/ DAMPER, 1.486 OD, 1.850 IH, .650 LIFT, 410 LBS/IN, HR

Spark Fitting

• Genuine Holley Quality Parts

STEEL RETAINERS, 1.437"-1.500"

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

STEEL RETAINERS, EB 1.437"

STL RETANRS, 1.500-1.550 7DEG

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

Straight 7.500" Long, .165" Wall, 7/16" Diameter Pushrod Set

Hi-Tech Straight 7.500" Long, .165" Wall, 7/16" Diameter Pushrod - Set of 16

Straight 7.700" Long, .165" Wall, 7/16" Diameter Pushrod

Hi-Tech Straight 7.700" Long, .165" Wall, 7/16" Diameter Pushrod - Single

Straight 7.800" Long, .165" Wall, 7/16" Diameter Pushrod

Hi-Tech Straight 7.800" Long, .165" Wall, 7/16" Diameter Pushrod - Single

Straight 7.950" Long, .165" Wall, 7/16" Diameter Pushrod

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Straight 8.050" Long, .165" Wall, 7/16" Diameter Pushrod Set

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Straight 8.950" Long, .165" Wall, 7/16" Diameter Pushrod Set

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Straight 9.400" Long, .165" Wall, 7/16" Diameter Pushrod

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Straight 9.550" Long, .165" Wall, 7/16" Diameter Pushrod

Hi-Tech Straight 9.550" Long, .165" Wall, 7/16" Diameter Pushrod - Single

Straight 9.800" Long, .165" Wall, 7/16" Diameter Pushrod

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Stud Girdle Adjusting Nut for 3/8" Stud w/ Snap Ring

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Stud Girdle Adjusting Nut Set of 12 for 3/8" Stud w/ (4) 4509S Snap Rings

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

STUD GIRDLE BAR, CB (1)

COMP Cams' part number 4021-B, STUD GIRDLE BAR, CB (1)

SUPER VALVE LOCKS, +.050 11/32

COMP Cams Super valve locks are wider-angled 10 degree locks.

SUPER VALVE LOCKS, 3/8"

3/8 Super Lock-1

Tensioner Assembly

• Genuine Holley Quality Parts

Tensioner Assembly

• Genuine Holley Quality Parts

Timing Chain for 3219 Timing Set

Exceed all original equipment timing chain Specifications.

Timing Retard Module Kit, 11°-15° Retard Modules

The kit comes with an 11°, 12°, 13°, 14°, and 15° retard module.

Tool Steel Retainers for 7228/7230 Conical Valve Springs

7& deg

Tru-Time Adjustable Cam Gear

• True laser-etched markings on the leading edge of the gear allow for quick, accurate adjustments
• CNC-machined from 6061-T6 billet aluminum
• Belt surface is hard anodized

Tru-Time Adjustable Cam Gear Bolt

• Direct replacement
• Stainless Steel
• Accomodates a complete Cam Gear

VALVE SPRING,1.454" BEEHIVE

Beehive Shape Reduces Spring and Retainer Weight.

VALVE SPRING, 1.683" DRAG RACE

Set of 16 Drag Race Springs.

VALVE SPRING ASSEMBLY, 1.551"

(4) Valve Spring: (in 9900-Kit) .700 lift, 1.550 OD, .710 ID, 230# @ 1.875", 700# @ 1.200", 1.110"

VALVE SPRINGS, 0.953" INNER, R

Single Inner Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

Valve Spring Shim - 1.480" OD, .765" ID .030" Thickness

These .030" thick Valve Spring Shims with 1.480" outside diameter and .765" inside diameter are used to equalize the installed height of valve springs.

Valve Stem Locks 11/32" Diameter

Edelbrock part #9611 Valve Stem Locks are 7 Degree, hardened Steel with a 11/32" stem, standard height, machined and hardened replacement valve locks.

Valve Stem Locks 3/8" Diameter

Edelbrock part #9612 Valve Stem Locks are 7 Degree, hardened Steel with a 11/32" stem, standard height, machined and hardened replacement valve locks.

Velva Ride Engine Stabilizer

This Velva Ride engine stabilizer is the most cost-effective way to smooth out the ride of your 1980 to 2000 FXR and FLT.

Velva Ride Engine Stabilizer Kit

This Velva Ride engine stabilizer is the most cost-effective way to smooth out the ride of your 1980 to 2000 FXR and FLT.

10 AN Plug

• Available for Any Plumbing Situation And Many Custom Applications.

10 Degree, 11/32", Single Groove Lock w/ Lash Cap Recess

This Steel Super Lock featuring a lash cap recess, 10& deg

10 Degree, 11/32", Single Groove Lock w/ Lash Cap Recess, -.050" Height

This Steel Super Lock with .050 install height features a lash cap recess, 10& deg

10 Degree, 11/32", Single Groove Lock w/o Lash Cap Recess

This Steel Super Lock without a lash cap recess features a 10& deg

10 Degree, 11/32", Single Groove Lock w/o Lash Cap Recess, +.050" Height

This Steel Super Lock with +.050 install height features a 10& deg