Engine Components

Magnum 9.650" Long, .080" Wall, 3/8" Diameter Pushrod Set of 8

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.650" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.650" Long, .080" Wall, 5/16" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.700" Long, .080" Wall, 3/8" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.800" Long, .080" Wall, 3/8" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.800" Long, .080" Wall, 3/8" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.800" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.800" Long, .080" Wall, 5/16" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

OD Spring Locator - 1.780" OD, .640" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

OD Spring Locator Set of 100 - 1.570" OD, .640" ID, .060" Thick

The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today.

OD Spring Locator Set of 100 - 1.730" OD, .640" ID, .060" Thick

The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today.

OD Spring Locator Set of 16 - 1.670" OD, .640" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

OD Spring Locator Set of 16 - 1.730" OD, .640" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

OD Spring Locator Set of 16 - 1.780" OD, .640" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

OD Spring Locator Set of 16 - 1.830" OD, .640" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

PUSHROD, CRS STOCK LENGTH

PUSHROD, HI-TECH 3/8 8.875"

Hi-Tech 8.875" Long, .080" Wall, 3/8" Diameter Pushrod

PUSHROD, HUSTLER, 5/16 OD X 7.122 X .075

PUSHROD SET, CB MAGNUM 3/8 RET RO-FIT

PUSHRODS, HI-TECH 3/8" 8.000"

37% stiffer than standard .080" wall pushrods.

PUSHRODS, HI-TECH GM V-6 5/16

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Replacement Adjuster Screw for Ultra Aluminum ARC Rockers

Ultra ARC Aluminum Series Rocker Arm - Cup Adjuster Screw - Single.

Shaft Mount Rocker .480" Wide Spacer for 1074 and 1076 Shaft Rocker System

Spacer for #1074 and #1076 Rockers .480" Wide - SIngle

SPRING LOCATOR, FOR 26120 W/.5

The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today.

SPRING LOCATOR, FOR 26120 W/.5

The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today.