Engine Components

Inverted Flare Plug

• Steel w/ Nickel Plated Finish
• 3/8"-24 Thread

LS Accessory Drive Bracket - Installation Kit for Middle Alignment

• Aluminum construction
• Will not rust
• Lighter than steel brackets

LS Accessory Drive Bracket - Installation Kit for Standard (Short) Alignment

• Aluminum construction
• Will not rust
• Lighter than steel brackets

LS High-Mount A/C Accessory Drive Bracket - Fits Sanden SD508 or SD7 Comp.

• The most cost effective LS bracket solution on the market!
• Utilizes commonly available and affordable GM A/C compressors
• Accepts GM R4 compressor (Sanden version now available)

Main Plate for 6500 & 6504

Main Plate for #6500 and 6504 Hi-Tech Belt Drive Systems

O-RING, FOR END PLAY ADJUSTING

• Long lasting durability

Race Extreme 1.683" OD Triple Springs; 2.100" Installed Height; 16 Springs

Elite Race Triple Valve Springs from COMP Cams have an .800" to .900" maximum lift and outside diameter of 1.680".

Replacement Timing Chain for 2121, 2108 and 2113 Timing Sets

Heavy-duty, heat-treated true double Roller timing chain.

Replacement Timing Chain for 3221 Timing Set

Exceed all original equipment timing chain Specifications.

Set of 100 - 10 Degree 11/32 Single Groove Locks w/ Lash Cap Recess -.050" Height

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case.

Set of 8 Metal Body Viton Valve Seals for .530" Guide Size, 11/32" Valve Stem

11/32" Viton Metal Body Seal for use with Triple Spring with a Total OD of .575"

Start and Step Timing Control

• Compatible with 4, 6 or 8-cylinder engines
• Accepts points, amplifiers and mag pickup trigger signals

Vacuum Cap Assortment

Use to block off open engine vacuum fittings.

DUAL SPRING W/ DAMPER, 1.442 OD, 1.800 IH, .600 LIFT, 391 LBS/IN, FT/HR

Endure-X Solid Roller Lifter w/ .904" Diameter, Left Pushrod Seat, .300" Taller

.300" Tall Roller lifter, .210" left offset Pushrod seat, cutaway body with oil band, single lifter

Engine Valve Spring

Single Inner Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

Evolution Sportster Performance Lifter

Our Hy-Rev Anti Pump-Up lifters for 1991 and newer Sportsters are great for increasing valvetrain stability and helping to increase RPM capability.

Hardened Steel Set of 8 - 7 Degree, 11/32", Single Groove Street Locks

Includes 8 Pairs of hardened Steel Street Locks: 1 Groove, 7& deg

High Energy 212/212 Hydraulic Flat Cam for International Harvester 304-392

High Energy 212/212 Hydraulic Flat Cam for International Harvester 304-392.

Hi-Tech 210 Radius 8.550" Long, .080" Wall, 3/8" Diameter Pushrod

Designed for high lift Applications where Pushrod and seat interference are problems at maximum lift, Hi-Tech 210& deg

Hi-Tech 7.500" Long, .080" Wall, 5/16" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 7.800" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 8.325" Long, .080" Wall, 3/8" Diameter Pushrod

Hi-Tech 8.325" Long, .080" Wall, 3/8" Diameter Pushrod - Single

Hi-Tech One-Piece 8.380" Long, .135" Wall, 3/8" Diameter Pushrod Set

Hi-Tech One-Piece 8.380" Long, .135" Wall, 3/8" Diameter Pushrod - Set of 16

Hi-Tech One-Piece 9.250" Long, .135" Wall, 3/8" Diameter Pushrod Set

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg