Engine Components

Endure-X Solid Roller Lifter w/ .904" Diameter, Left Pushrod Seat, .300" Taller

.300" Tall Roller lifter, .210" left offset Pushrod seat, cutaway body with oil band, single lifter

Engine Valve Spring Kit

COMP Cams' part number 916-16, valve springs, 1.567" 2-Spring Assembly

Evolution Sportster Performance Lifter

Our Hy-Rev Anti Pump-Up lifters for 1991 and newer Sportsters are great for increasing valvetrain stability and helping to increase RPM capability.

High Energy 9.252" Long, 3/8" Diameter Pushrod Set

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

Hi-Tech 7.500" Long, .080" Wall, 5/16" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 7.700" Long, .080" Wall, 3/8" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 7.800" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech Oil Restricting 6.750" Long, .080" Wall, 5/16" Diameter Pushrod Set

Hi-Tech Oil Restricting 6.750" Long, .080" Wall, 5/16" Diameter Pushrod - Set of 16

Hi-Tech Oil Restricting 7.500" Long, .080" Wall, 5/16" Diameter Pushrod Set

COMP Cams Hi-Techâ„¢ Oil Restricting pushrods feature 0.050" oil holes, which are half the size of standard Hi-Techâ„¢ pushrods.

Hi-Tech One-Piece 8.380" Long, .135" Wall, 3/8" Diameter Pushrod Set

Hi-Tech One-Piece 8.380" Long, .135" Wall, 3/8" Diameter Pushrod - Set of 16

HRT Blower

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.

ID Spring Locator - 1.285" OD, .805" ID, .040" Thickness

ID Spring Locator - 1.285" OD, .805" ID, .040" Thickness - Single

Machined Steel Set of 12 - 7 Degree, 8mm, Single Groove Race Locks

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case.

Magnum 6.750" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 8.900" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.750" Long, .080" Wall, 3/8" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Race Endurance 1.565" OD Dual Spring; 2.000" Installed Height; 1 Spring

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

Race Extreme 1.683" OD Triple Spring; 2.100" Installed Height; 1 Spring

Elite Race Triple Valve Springs from COMP Cams have an .800" to .900" maximum lift and outside diameter of 1.680".

Race Sportsman 1.269" OD Single Spring; 1.750" Installed Height; 1 Spring

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

STEEL RETAINERS, 1.240"

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

Straight 7.400" Long, .165" Wall, 7/16" Diameter Pushrod

Hi-Tech Straight 7.400" Long, .165" Wall, 7/16" Diameter Pushrod - Single

UltraPro One Way Check Valve

• Body is Anodized Aluminum

VALVE SPRING, 1.683" DRAG RACE

Set of 16 Drag Race Springs.

VALVE SPRINGS, 0.953" INNER, R

Single Inner Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

10 Degree Steel Retainer Set of 100 for 26120 Beehive Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.