Engine Components

Set of 8 O-Ring Valve Seals for Stock Guide Size, 11/32" Valve Stem

COMP Cams offers a complete line of valve stem Seals, from the stock GM "O-Ring" to the positive-stop PTFE Seal.

SET, SINGLE SPRING W/ DAMPER, 1.486 OD, 1.850 IH, .650 LIFT, 410 LBS/IN, HR

Shaft Mount Rocker .480" Wide Spacer Set for 1074 and 1076 Shaft Rocker System

Spacer for #1074 and #1076 Rockers .480" Wide - Set of 8

SINGLE SPRING W/ DAMPER, 1.440 OD, 1.750 IH, .600 LIFT, 350 LBS/IN, FT/HR

Single Valve Spring, 1.404 OD, 1.650 IH, .550 Lift, 300 LBS/IN - Set of 1

COMP Cams new 26903 single valve springs are a product of innovative design and superior craftsmanship.

Single Valve Spring, 1.404 OD, 1.650 IH, .550 Lift, 300 LBS/IN - Set of 16

COMP Cams new 26903 single valve springs are a product of innovative design and superior craftsmanship.

Sportsman Intake Valve Set Chevrolet Small Block w/ 2.080" Head, 4.911" Length

These valves are designed to be a performance oriented replacement for the factory Chevy Small Block Gen.

Spring Seat Cup, 1.745" X .570" X .220"

The old standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today.

Stage 1 LST 180/198 Hydraulic Roller Cam

Stage 1 No Springs Required LST Hydraulic Roller Cam

STEEL RETAINER, 1.375"

STEEL RETAINERS, 1.437"

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

STEEL RETAINERS, 1.437"

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

STEEL RETAINERS, 1.437"

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

STEEL RETAINERS, 1.550" TRIPLE

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

STEEL RETAINERS, 3/8" 1.437"

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

STEEL RETAINERS, STD 7DEG 2691

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

STEEL RETAINRS, 1.030" USE W/2

1.030" Steel Retainer for use with #26120 valve springs and #600 valve locks.

STL RETNRS,EB 1.500-1.550 7DEG 11/32STEM

Straight 8.000" Long, .165" Wall, 7/16" Diameter Pushrod Set

Hi-Tech Straight 8.000" Long, .165" Wall, 7/16" Diameter Pushrod - Set of 16

Straight 9.600" Long, .165" Wall, 7/16" Diameter Pushrod Set

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

STUD GIRDLE BAR, CS (1) 60/40

STUD GIRDLE BAR, CS BHEAD

STUD GIRDLE BAR, FS GOLD (1)

STUD GIRLDE BAR, FOR CS (1)

Tensioner Upgrade Kit for #1597 GM E-Force Superchargers

Edelbrock Part #15028 Tensioner Upgrade Kit is engineered to handle the increased belt stress encountered in high horsepower Edelbrock applications.