Engine Components

LS/LT High-Mount Accessory Drive Bracket - A/C, P/S & Alt Brackets

• The most cost effective LS bracket solution on the market!
• A/C bracket accepts GM R4 compressor (Sanden version now available)
• Ideal for crate engines, take out motors and engine builders!

Magnum 7.450" Long, .080" Wall, 3/8" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 7.700" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.200" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.250" Long, .080" Wall, 3/8" Diameter Pushrod Set of 8

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.750" Long, .080" Wall, 3/8" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum Rocker Stud Set w/ 7/16" Base Thread and 7/16" Rocker Thread

COMP Cams takes pride in having the finest Rocker arm Studs available on the market.

MANIFOLD-BRACKET KIT, LT4 DRY-BLACK

• Genuine Holley Quality Parts

Mid LSA Accessory Drive Bracket Kit - Alternator - Black

• Compatible with all Holley Alternators
• Compatible with Holley P/N 20-160 compact SD7 A/C kit
• Compatible with LSA and 2010-15 LS Camaro water pumps

Mid LSA Accessory Drive Bracket Kit - Alternator - Natural

• Compatible with all Holley Alternators
• Compatible with Holley P/N 20-160 compact SD7 A/C kit
• Compatible with LSA and 2010-15 LS Camaro water pumps

Mid LSA/LS Accessory Drive Bracket Kit - Power Steering - Natural

• P/S hard line adapters available (197-207)
• Compatible with Holley P/N 20-160 compact SD7 A/C kit
• Compatible with LSA and 2010-15 LS Camaro water pumps

Performance Exhaust Gasket Material

• Withstands Extreme Exhaust Heat
• Superior Tensile Strength
• Resists Deteriorating

Performance Intake Gasket Material

• Conforms well to irregular flange surfaces
• Very good crush resistance at high flange pressures
• Bulk sheet easily cut for making custom gaskets

Performer Series Retainer (Qty 16)

These retainers are designed to be used with springs featuring 1.55" O.D. and 1.125 I.D.

Pushrod Seat Removal Tool

With our Pushrod Seat Insert Removal Tool for Elite Raceâ„¢ Solid Roller Lifters, removing the Pushrod seat inserts and swapping them out is a simple process that allows the user to easily adjust the Pushrod angle.

Race Endurance 1.551" OD Dual Spring; 2.000" Installed Height; 1 Spring

Elite Race Double Valve Springs from COMP Cams have a .750"+ maximum lift and outside diameter of 1.680".

Race Endurance 1.560" OD Dual Springs; 2.050" Installed Height; 16 Springs

Elite Race Double Valve Springs from COMP Cams have a .700" to .800" maximum lift and outside diameter of 1.549".

Race Extreme 1.635" OD Dual Springs; 1.950" Installed Height; 16 Springs

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

Race Sportsman 1.332" OD Conical Spring; 1.900" Installed Height; 1 Spring

1.060/1.332" OD Conical Spring

Race Sportsman 1.332" OD Conical Springs; 1.900" Installed Height; 16 Springs

Revolutionary Advancement In High Performance Spring Technology. < table border="1">< tbody>< tr>< td>7230-16</td>< td> Outer Diameter and</td>< td> Inner Diameter and</td>< td> Seat Load</td>< td> Open Load</td>< td> Coil Bind</td>< td> Rate and</td></tr>< tr>< td> Top</td>< td>1.060"</td>< td>.660"</td>< td rowspan="2"> 145 @ 1.900"</td>< td rowspan="2"> 495 @ 1.225"</td>< td rowspan="2">1.185"</td>< td rowspan="2">520</td></tr>< tr>< td> Bottom</td>< td>1.332"</td>< td>.932"</td></tr></tbody></table>

Race Sportsman 1.454" OD Beehive Springs; 1.800" Installed Height; 16 Springs

COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train.

Race Sportsman 1.585" OD Beehive Spring; 1.925" Installed Height; 1 Spring

With a .640" maximum lift, these Beehive Valve Springs were designed for high end Solid flat tappet and hydraulic Roller cams.

Race Sportsman 1.585" OD Beehive Springs; 1.925" Installed Height; 16 Springs

With a .640" maximum lift, these Beehive Valve Springs were designed for high end Solid flat tappet and hydraulic Roller cams.

Race Street 1.290" OD Conical Springs; 1.800" Installed Height; 16 Springs

Revolutionary Advancement In High Performance Spring Technology. < table border="1">< tbody>< tr>< td>7228-16</td>< td> Outer Diameter and</td>< td> Inner Diameter and</td>< td> Seat Load</td>< td> Open Load</td>< td> Coil Bind</td>< td> Rate and</td></tr>< tr>< td> Top</td>< td>1.020"</td>< td>.650"</td>< td rowspan="2"> 136 @ 1.800"</td>< td rowspan="2"> 412 @ 1.170"</td>< td rowspan="2">1.125"</td>< td rowspan="2">438</td></tr>< tr>< td> Bottom</td>< td>1.290"</td>< td>.920"</td></tr></tbody></table>

Race Street 1.320" OD Dual Springs; 1.770" Installed Height; 16 Springs

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.