Engine Components

Intake Valves for 60679, 60699, 61669 & 61649 Heads

The Edelbrock #93771 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #60779 & #60179 Cylinder Heads

The Edelbrock #9366 Intakes Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #61459, #61559 & #61555 Cylinder Heads

The Edelbrock #97041 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #77919, #77929, #77939 & #77949 Heads

The Edelbrock #93775 Intakes Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Lower Gear for 6100 Belt Drive

Lower Gear for 6100

LS High-Mount A/C Accessory Drive Bracket - Fits Sanden SD508 or SD7 Comp.

• The most cost effective LS bracket solution on the market!
• Utilizes commonly available and affordable GM A/C compressors
• Accepts GM R4 compressor (Sanden version now available)

LS/LT High-Mount Accessory Drive Bracket

• The most cost effective LS bracket solution on the market!
• Simple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets
• A/C bracket accepts GM R4 compressor (Sanden version now available)

Machined Steel 7 Degree, 3/8", Single Groove Race Lock

This single groove Machined Steel Street Lock with 7& deg

Magnum 7.15" Long, .08" Wall, 5/16" Diameter Pushrod Set 12

The Magnum 5/16" and 3/8" pushrods offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 7.450" Long, .080" Wall, 3/8" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 7.700" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.130" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.200" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.250" Long, .080" Wall, 3/8" Diameter Pushrod Set of 8

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.750" Long, .080" Wall, 3/8" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum Rocker Stud Set w/ 7/16" Base Thread and 7/16" Rocker Thread

COMP Cams takes pride in having the finest Rocker arm Studs available on the market.

MANIFOLD-BRACKET KIT, LT4 DRY-BLACK

• Genuine Holley Quality Parts

Mid LSA Accessory Drive Bracket Kit - Alternator - Black

• Compatible with all Holley Alternators
• Compatible with Holley P/N 20-160 compact SD7 A/C kit
• Compatible with LSA and 2010-15 LS Camaro water pumps

Mid LSA Accessory Drive Bracket Kit - Alternator - Natural

• Compatible with all Holley Alternators
• Compatible with Holley P/N 20-160 compact SD7 A/C kit
• Compatible with LSA and 2010-15 LS Camaro water pumps

Mid LSA/LS Accessory Drive Bracket Kit - Power Steering - Natural

• P/S hard line adapters available (197-207)
• Compatible with Holley P/N 20-160 compact SD7 A/C kit
• Compatible with LSA and 2010-15 LS Camaro water pumps

Performance Exhaust Gasket Material

• Withstands Extreme Exhaust Heat
• Superior Tensile Strength
• Resists Deteriorating

Performance Exhaust Gasket Material

• Heavy duty material, .062" thick
• Up to 1200 degrees F
• Excellent sealing and durability

Performance Intake Gasket Material

• Conforms well to irregular flange surfaces
• Very good crush resistance at high flange pressures
• Bulk sheet easily cut for making custom gaskets

Performer Series Retainer (Qty 16)

These retainers are designed to be used with springs featuring 1.55" O.D. and 1.125 I.D.

POLY LOCK, 7/16 HIGH ENERGY AL

High Energyâ„¢ Aluminum Polylocks with 7/16" Stud diameter.