Recent vehicles
Vehicles you shop for show up here. Pick one in the Shop By Vehicle bar below.
Clear current vehicleFree shipping in Canada, ships in about 2 weeks
Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.
Ships in about 2 weeks
Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.
Ships in about 2 weeks
COMP Cams' 26097 dual valve springs are a product of innovative design and superior craftsmanship.
Free shipping in Canada, ships Oct 2
Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.
Free shipping in Canada, ships Oct 2
The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.
Ships Oct 2
With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg
Ships in about 2 weeks
Includes 16 Pairs of Machined Steel Race Locks: 1 Groove, 7& deg
Ships Oct 2
Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.
Free shipping in Canada, ships in about 2 weeks
Ideal for use in race applications, our wider 10 degree angle locks better distribute increasing spring loads over the retainer more than typicaly 7 degree locks.
Free shipping in Canada, ships in about 2 weeks
5/16 X .530 Viton Metal Body Seal 575 OD
Ships in about 2 weeks
These new Tool Steel Retainers from COMP Cams have a 10& deg
Ships in about 2 weeks
Single valve Seal with Metal body Viton Seal, .530" Guide, 11/32" valve size.
Ships in about 2 weeks
3/8 x .530" Metal Body Viton Valve Seal
Ships in about 2 weeks
Hi-Tech Polylock/Adjusting Nut, 1/2" Stud for Ultra Pro Mangum/Ultra Pro Magnum XD Rockers - Single
Ships in about 2 weeks
Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case.
Free shipping in Canada, ships in about 2 weeks
Replacement Timing Chain for 2120, 2131, 2135 and 2138 Magnum Timing Sets
Ships in about 2 weeks
Exceed all original equipment timing chain Specifications.
Ships in about 2 weeks
Ideal for use in race applications, our wider 10 degree angle locks better distribute increasing spring loads over the retainer more than typicaly 7 degree locks.
Free shipping in Canada, ships in about 2 weeks
The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.
Free shipping in Canada, ships in about 2 weeks
Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.
Free shipping in Canada, ships in about 2 weeks
11/32" Viton Metal Body Seal for use with Triple Spring with a Total OD of .575"
Ships in about 2 weeks
Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.
Ships in about 2 weeks
These new Tool Steel Retainers from COMP Cams have a 7& deg
Ships in about 2 weeks
These new Tool Steel Retainers from COMP Cams have a 7& deg
Free shipping in Canada, ships in about 2 weeks
