Engine Components

Set of 16 Umbrella Valve Seals for Stock Guide Size, 11/32" Valve Stem

Fits: 11/32" Valve Stems - OE-Size Valve Guides (.750" Outer Diameter).

Set of 8 Hardened Lash Caps w/ 3/8" Valve Stem, .190" Head Height

Includes 8 Hardened Lash Caps: 3/8 Stem Size, .190" Head Height, .080" Thickness.

Silicone Vacuum Hose, Orange, 10mm x 100cm

• 100-percent silicone construction
• Measures 10mm x 100cm
• Available in multiple colors

Spacer Kit, Small Block Ford Accessory Drive Crank Pulley - 3.00" Damper

• 3 options for multiple SBF applications

Stainless Intake Valve for GM LS3 w/ 2.165" Head, 4.894" Length

COMP Cams' part number 6072-1, Stainless Intake Valve for GM LS3 w/ 2.165" Head, 4.894" Length.

Steel Retainer for Set of 16

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

STEEL RETAINERS, 1.437"-1.500"

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

Straight 7.750" Long, .165" Wall, 7/16" Diameter Pushrod Set

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Straight 8.050" Long, .165" Wall, 7/16" Diameter Pushrod Set

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Straight 8.350" Long, .165" Wall, 7/16" Diameter Pushrod Set

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Straight 9.900" Long, .165" Wall, 7/16" Diameter Pushrod

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Stud Girdle Adjusting Nut for 7/16" Stud w/ Snap Ring

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

STUD GIRDLE BAR, CB (1)

COMP Cams' part number 4021-B, STUD GIRDLE BAR, CB (1)

Tensioner Assembly

• Genuine Holley Quality Parts

Tensioner Assembly

• Genuine Holley Quality Parts

Tensioner Upgrade Kit for #1572, #1575, #1591 & #1594 GM E-Force Superchargers

Edelbrock Part #15035 Tensioner Upgrade Kit is engineered to handle the increased belt stress encountered in high horsepower Edelbrock applications.

Tensioner Upgrade Kit for #1598 GM E-Force Superchargers

Edelbrock Part #15029 Tensioner Upgrade Kit is engineered to handle the increased belt stress encountered in high horsepower Edelbrock applications.

Three Stage Retard Control

• Twenty-five degrees start retard
• Three separate retards

Timing Chain for 3127, 3101, 3121, 3108 and 3113 Hi-Tech Timing Sets

Ideal for all street performance and race applications.

Timing Cover Gasket for 6200 Belt Drive

Extreme application belt for high rpm and high compression durability.

Titanium Set of 16 - 10 Degree, 11/32", Single Groove Locks w/ Lash Cap Recess

These Titanium Super Locks with lash cap recess feature a 10& deg

Titanium Set of 8 - 10 Degree, 11/32", Single Groove Locks w/ Lash Cap Recess

These Titanium Super Locks with lash cap recess feature a 10& deg

Tru-Time Adjustable Cam Gear Bolt

• Direct replacement
• Stainless Steel
• Accomodates a complete Cam Gear

Turbocharger Oil Flange Fittings

• These Fittings are Made from 2024 Aluminum w/ Black Anodized Finish & 303 Stainless Steel

UltraPro One Way Check Valve

• Body is Anodized Aluminum