Engine Components

HRT Turbo

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.

HRT Turbo

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.

Idler Pulley-Smooth LT5 GM Engine

• Genuine Holley Quality Parts

ID Spring Locator - 1.080" OD, .440" ID, .045" Thickness

ID Spring Locator - 1.285" OD, .532" ID, .135" Thickness

ID Spring Locator - 1.300" OD, .505" ID, .040" Thickness

ID Spring Locator - 1.300" OD, .505" ID, .040" Thickness - Single

ID Spring Locator - 1.300" OD, .570" ID, .060" Thickness

ID Spring Locator - 1.300" OD, .570" ID, .060" Thickness, .910" Spring ID

ID Spring Locator - 1.400" OD, .520" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator - 1.420" OD, .570" ID, .060" Thickness

ID Spring Locator - 1.550" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator - 1.550" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator - 1.600" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today.

ID Spring Locator - 1.635" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator Set of 100 - 1.510" OD, .570" ID, .060" Thick

The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today.

ID Spring Locator Set of 16 - 1.510" OD, .630" ID, .060" Thickness

ID Spring Locators for 26120

Intake Valve for 60459, 60479, 60499 & 60559 Heads

The Edelbrock #9770 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valve for #60669 & #60689 Cylinder Heads

The Edelbrock #93661 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valve for #61459, #61559 & #61555 Cylinder Heads

The Edelbrock #97040 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valve for #77919, #77929, #77939 & #77949 Heads

The Edelbrock #93774 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #60459, #60479, #60499 & #60559 Heads

The Edelbrock #9775 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #77619, #77629, #77639 & #77649 Heads

The Edelbrock #9785 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Low Profile Vacuum Fitting for Holley Double-Pumper

Edelbrock part #8096 Vacuum Adapter Fitting is a low profile elbow that is designed to provide clearance for Holley and other carbs with a rear fuel bowl that extends over the vacuum port tap in most intake manifolds.

LS/LT High-Mount Accessory Drive Bracket

• The most cost effective LS bracket solution on the market!
• Simple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets
• A/C bracket accepts GM R4 compressor (Sanden version now available)

LS/LT High-Mount Accessory Drive Bracket - Driver's Side P/S & Alt Bracket

• The most cost effective LS bracket solution on the market!
• Utilizes commonly available and affordable GM alternators and power steering pumps
• Ideal for crate engines, take out motors and engine builders!

LS/LT High-Mount Accessory Drive Bracket - Passenger's & Driver's Side Brackets

• The most cost effective LS bracket solution on the market!
• Simple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets
• A/C bracket accepts GM R4 compressor (Sanden version now available)