Recent vehicles
Vehicles you shop for show up here. Pick one in the Shop By Vehicle bar below.
Clear current vehicleHi-Tech Straight 9.950" Long, .165" Wall, 7/16" Diameter Pushrod - Set of 16
Free shipping in Canada, ships in about 2 weeks
Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.
Ships in about 2 weeks
Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.
Ships Oct 5
Ships in about 2 weeks
Ships in about 2 weeks
Free shipping in Canada, ships in about 2 weeks
Free shipping in Canada, ships in about 2 weeks
These .030" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.
Ships in about 2 weeks
These .060" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.
Ships in about 2 weeks
These .030" thick Valve Spring Shims with 1.480" outside diameter and .765" inside diameter are used to equalize the installed height of valve springs.
Ships in about 2 weeks
Edelbrock part #9612 Valve Stem Locks are 7 Degree, hardened Steel with a 11/32" stem, standard height, machined and hardened replacement valve locks.
Ships in about 2 weeks
This Velva Ride engine stabilizer is the most cost-effective way to smooth out the ride of your 1980 to 2000 FXR and FLT.
Free shipping in Canada, ships in about 2 weeks
Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.
Free shipping in Canada, ships Oct 5
High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.
Ships Oct 6
Designed for high lift Applications where Pushrod and seat interference are problems at maximum lift, Hi-Tech 210& deg
Free shipping in Canada, ships in about 2 weeks
With a 17 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech .105 Wall pushrods feature seamless chromemoly tubing that ensures even greater strength and durability.
Free shipping in Canada, ships Oct 5
The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.
Ships in about 2 weeks
COMP Cams Hi-Techâ„¢ Oil Restricting pushrods feature 0.050" oil holes, which are half the size of standard Hi-Techâ„¢ pushrods.
Free shipping in Canada, ships in about 2 weeks
COMP Cams offers a complete line of valve stem Seals, from the stock GM "O-Ring" to the positive-stop PTFE Seal.
Ships Oct 5
Includes 8 Hardened Lash Caps: 11/32 Stem Size, .210" Head Height, .080" Thickness.
Ships in about 2 weeks
Hi-Tech Straight 8.900" Long, .165" Wall, 7/16" Diameter Pushrod - Single
Ships in about 2 weeks
This Steel Super Lock featuring a lash cap recess, 10& deg
Ships Oct 5
This Steel Super Lock without a lash cap recess features a 10& deg
Ships Oct 5
Upgrading to these 10& deg
Free shipping in Canada, ships in about 2 weeks
Ships in about 2 weeks
