Engine Components

10 Lightweight Titanium Retainer Set of 16 for 1.625" OD Triple Springs

Upgrading to these 10& deg

10 Steel Retainer w/ +.050" Installed Height for 26095 Beehive Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Superlock Steel Retainer for 1.437"-1.500" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

1.125" Tall Polylock Set for High Energy Rockers w/ 7/16" Stud

High Energyâ„¢ Aluminum Polylocks with 7/16" Stud diameter.

Dual Taper 9.250" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Hi-Tech 9.750" Long, .080" Wall, 3/8" Diameter Pushrod Set of 8

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Replacement Timing Chain for 2100 and 2136 Timing Sets

Replacement Timing Chain for 2100 and 2136 Magnum Timing Sets

Stud Girdle Adjusting Nut Set of 12 for 3/8" Stud w/ (4) 4509S Snap Rings

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

7 Steel Retainer Set of 16 for 11/32" Valve w/ 26915/26918 Beehive Springs

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

Hi-Tech Polylock Set for 1/2" Stud Ultra Pro Magnum Rockers

Hi-Tech Polylocks/Adjusting Nuts, 1/2" Stud for Ultra Pro Magnum/Ultra Pro Magnum XD Rockers - Set of 16

Baffled Breather Grommets

• Replaces Stock Grommets
• 2 Per Set
• Fits 1.25 inch valve cover hole.

Magnum 7.900" Long, .080" Wall, 3/8" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Set of 16 Metal Viton Valve Seals for .530" Guide Size, 3/8 Valve Stem

3/8 x .530" Metal Body Viton Valve Seal

10 Degree Superlock Steel Retainer Set of 100 for 1.437"-1.500" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

Dual Taper 8.850" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Hi-Tech 10.250" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

HRT Turbo

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.

10 Tool Steel Retainer for All Valves w/ 1.500"-1.550" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

1 Metal Viton Valve Seal for .530" Guide Size, 3/8 Valve Stem

3/8 x .530" Metal Body Viton Valve Seal

LS High-Mount A/C Accessory Drive Bracket - Fits Sanden SD508 or SD7 Comp.

• The most cost effective LS bracket solution on the market!
• Utilizes commonly available and affordable GM A/C compressors
• Accepts GM R4 compressor (Sanden version now available)

Replacement Timing Chain for 2120, 2131, 2138 and 2135 Timing Sets

Replacement Timing Chain for 2120, 2131, 2135 and 2138 Magnum Timing Sets

10 Degree Superlock Steel Retainer Set of 100 for 1.437"-1.500" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Titanium Retainer Set of 16 for 1.625" OD 26091 Springs

Upgrading to these 10& deg

CAM BOLTS, 5/16 X 7/8 SHCS

COMP Cams' part number 6500CB-1, Cam Bolt for 6500 Belt Drive.

CONICAL SPRING, 1.445/1.660 OD, 1.900 IH, .750 LIFT, 400 LBS/IN, SUPERFINISH, HR